Contact Platform Support
Help CenterArduino Gps Gsm With SIM548C Module
Related Products
-
Telit 3.5G UMTS HSDPA7.2 GPS GSM Module UC864-ENegotiableMOQ: 1 Piece -
Motorola GPS GSM Module GPRS Module G30NegotiableMOQ: 1 Piece
-
Telit CDMA 3G GPS GSM Module CC864-SR CC864-DualNegotiableMOQ: 1 Kilogram
-
GPS GSM Module Sierra Wireless WISMO218NegotiableMOQ: 1 Piece
-
Quectel GPS GSM Module GPRS Module M10NegotiableMOQ: 1 Kilogram
Certification:FCC CE Rohs
arduino gps gsm with SIM548C module
Description:
Want your Arduino GPS positioning, text messaging, the phone function, you only need this three-in-one module can be achieved.
GPS / GPRS / GSM communication module is based on a combination of SIMCOM Company SIM548C design, the GSM / GPRS & GPS functionality as a whole.
Positioning through GPS functionality, GSM SMS, GSM phone, GPRS TCP / IP protocol GPS data or other data sent to the remote. Compatible with Arduino Interface Specification.
Play to your imagination and innovation capability, use your cell phone via SMS remote control all the things you want to control.
Specifications:
• Operating power: 5 ~ 12V
• Operating Current: usually current? MA, the actual transient current up to 2A
• Operating Temperature: -30 ° C ~ +80 ° C
• Module dimensions: length 82mm, width 70mm
• Quad-band GSM / GPRS 850/900/1800/1900MHz
• GPRS multi-the slot the Class 10 standard
• GPRS mobile station a Class B standards
• meet the GSM 2/2 + standards
-Class 4 (2W @ GSM850/900MHz)
-Class 1 (1W @ GSM1800/1900MHz)
• AT command and control (GSM 07.07, 07.05 and the SIMCom enhanced AT command set)
GPS indicator
• Receiver 20 channels, L1 1575.42 MHz, C / A code 1,023 MHz chip rate
• accurate positioning of the 2.5 m CEP
- Without the SA / Velocity 0.1 m / s,
- Without SA / Time 1 μs GPS synchronization time
• DGPS / SBAS position: 2.0 CEP
• Date WGS-84
• Capture rate (95% TTFF first local location)
- Hot start: <1 second, the average outdoor
- Warm start: 35 seconds, the average outdoor
- Cold start: 35 seconds, the average outdoor
• support for AGPS
• Protocol
- NMEA-0183
- SiRF binary
- RTCM SC-104
Performance description
GSM / GPRS indicators
• Quad-band GSM 850/900/1800/1900MHz
• GPRS multi-the slot the Class 10 standard
• GPRS mobile station a Class B standards
• meet the GSM 2/2 + standards
-Class 4 (2W @ GSM850/900MHz)
-Class 1 (1W @ GSM1800/1900MHz)
• AT command and control (GSM 07.07, 07.05 and the SIMCom enhanced AT command set)
• Support STK
• Support for low-power mode
• Supply voltage range: 3.4 ... 4.5 V
• Normal operation temperature: -30 ° C to +80 ° C
• Restricted operation temperature: -40 ° C to -30 ° C and +80 ° C to +85 ° C
• Storage Temperature: -45 ° C to +90 ° C
GPS indicator
• Receiver 20 channels, L1 1575.42 MHz, C / A code 1,023 MHz chip rate
• accurate positioning of the 2.5 m CEP
- Without the SA / Velocity 0.1 m / s,
- Without SA / Time 1 μs GPS synchronization time
• DGPS / SBAS position: 2.0 CEP
• Date WGS-84
• Capture rate (95% TTFF first local location)
- Hot start: <1 second, the average outdoor
- Warm start: 35 seconds, the average outdoor
- Cold start: 35 seconds, the average outdoor
• support for AGPS
• Operating voltage: 3.3 V DC ± 5%
• Low power consumption: 3.3 V, 160mW
• Protocol
-NMEA-0183 (default)
-SiRF binary
-RTCM SC-104
Crystal oscillator (TCXO), frequency stability, temperature ± 0.5ppm
• Memory: 4 Mb flash and 1Mb SRAM
Module features
• implementation of the AT commands through the serial port
• GSM serial port baud rate: 300,1200,2400,4800,9600,19200,38400,57600,115200 bps (default 115200bps)
Available through AT commands to change the baud rate
GSM auto-baud: 4800,9600,19200,38400,57600,115200 bps
• serial output GPS location information
• GPS serial port baud rate: 1200,2400,4800,9600,19200,38400,57600,115200 bps (default 4800bps)
• Supports 6-pin clamshell SIM card holder
• Support for headset, microphone interface
• Support for 4 * 4 matrix keyboard interface
• Module Working voltage: 5V
• Module dimensions: length 82mm, width 70mm
• Module weight:
Distribution list:
Product list:
Module one
GSM test method:
1 the download GSM_Test.pde program to the Arduino control board.
2, the SIM card into the slot on the board of the GPS / GPRS / GSM.
3, the GPS / GPRS / GSM board plugged into the Arduino control board, open the board GSM_PWR switch dial is switched ON.
4, to prepare a USB to TTL serial converter module, bread lines will be converted to the module GND, TX, RX and GPS / GPRS / GSM board GND with, TX, RX-one correspondence connection.
5, the connection good GSM antenna. DC power to the Arduino control board power supply, GPS / GPRS / GSM board of ST
Send Inquiry to This Supplier
You May Also Like
-
FFU( Fan Filter Unit & Purifying Equipment )NegotiableMOQ: 1
-
Seawater Desalination SystemUS$ 2000 - 1000000MOQ: 1 Set
-
Swivel Fittings Thread Protective Caps Hydraulic Line Hose Ro Membrane End CapsUS$ 0.05 - 0.11MOQ: 1 Piece
-
Industrial Water Filtering MachineNegotiableMOQ: 1 Set
-
Excavator Diesel Engine Oil Filter Element 9N-3367US$ 7 - 10MOQ: 10 Pieces
-
Inline Water Filter For RefrigeratorsUS$ 3.5 - 7.9MOQ: 1000 Pieces
-
High Efficient Industrial Water Sand FilterUS$ 1,000 - 3,000MOQ: 2 Sets
-
Original New LFCN-2750+ LFCN-2750 Low Pass FilterUS$ 1 - 2MOQ: 10 Pieces
-
Excavator Parts Filter Element 25 Micron 32/906501US$ 1 - 20MOQ: 50 Pieces
-
Wine Automatic Self Cleaning FilterUS$ 500 - 15,000MOQ: 1 Set
