hydraulic carbon steel tee cold forming machine

The Main Technical Parameters of The elbow hot Machine

1. The oil cylinder: Ф125mm,the rod:Ф 90mm ,the effective trip: 2.5m,  pressure:21Mpa,2 bars

The maximum thrust of the 2 cylinders: 50 tons;  The normal speed: 0—140cm/min ,

The max backward speed: 450cm/min.

2. The pump station:

25scy-plunger pump :1 set, 5.5KW  Motor:  1 set.

CB-20 gear pump: 1 set, 3 KW motor: 1set

3. The hydraulic valve is integrated oil rout, 380v,220v-50HZ.

4. High-frequency power ark (power 85KW)

The works and the scope of supply of the supplier

A. frame for the main engine: 1 piece, hydraulic pump station: 1 set,

distribution ark 1set,

B. High-frequency electric ark:1 piece,  Ф114 induction heating coil 1 piece.