Contact Platform Support
Help Center45 Hand Hold Rock Drills Internal - Combustion Pneumatic Drill YN27
Related Products
-
6m Depth Pneumatic Jack Hammer Rock Drills For Vertical Down Drilling YN30ANegotiableMOQ: 1 Piece -
Jack Hammers Hand Hold Internal - Combustion Rock Drills For Rock Drilling YN27NegotiableMOQ: 1 Piece
-
Pneumatic Breaker Rock Drills For The Construction B47NegotiableMOQ: 1 Piece
-
0.63mpa Pneumatic Breaker, Breaker Drills Rock Drilling Machines B87NegotiableMOQ: 1
-
0.4-0.5 Mpa Jack Hammers Air Leg Pneumatic Rock Drill For Ifferent Rock Formations YT24NegotiableMOQ: 1 Piece
Certification:CE,ISO
45° Hand Hold Rock Drills Internal - Combustion Pneumatic Drill YN27
Advantages
YN27 hand hold internal-combustion rock drill is a hand-rock drilling tool which integrates the small gasoline-engine, compressor and rock drill. It can blow off the rock powder in the blast hole by the compressing air generated from itself. Just 27kg weight for the main engine . Easy to carry about.Applicable for the areas of high mountains and of without power and wind pressure equipment, especially for those temporary projects with frequent movement.
Applications
1. Applicable for rock drilling and breaking. Widely used in the earth and stone work of national defense,mining,road-construction,city construction and quarrying,etc.
2. Wide applicability. Regardless of the high mountains,flat grounds,the extremely hot area with the temperature of + 40℃ and bitter cold area of -40℃,it can work in good condition.
Specifications
|
Weight of the main engine |
kg |
27 |
|
Type of carburetor |
Non carburetor float |
|
|
Ignition system |
Contactless |
|
|
Exhaustion |
cm3 |
185 |
|
Rotating speed of engine with load (measured in five holes drilling) |
r/min |
≥2450 |
|
Idling rotating speed of drill rods |
r/min |
≥250 |
|
End of tool shank hex |
mm |
22*108 |
|
Shock energy |
J |
≥25 |
|
Max. elevation angle of drilling |
° |
45 |
|
Max. drilling depth |
m |
≥6 |
|
Tank volume |
L |
≥1.1 |
|
Oil consumption(in five holes drilling) |
L/m |
≤0.12 |
|
lubrication |
Automaticly lubricated with gasoline and engine oil |
|
|
Mixing proportion of gas and lubrication |
12:01 |
|
|
spark plug electrode gap |
mm |
0.5-0.6 |
Send Inquiry to This Supplier
You May Also Like
-
Portable Laser Rust Cleaning Machine 2000W / Laser Welding Machine/ Máquina de Limpieza LáserNegotiableMOQ: 1 Set
-
60w Co2 Laser Engraver Cutting Machine 6040 Laser Cutting Engraving Machine Laser Glass Engraving MachineNegotiableMOQ: 1 Set
-
Metal Tube Laser Cutting MachineUS$ 9750 - 9800MOQ: 1 Piece
-
Factory Direct Sell Laser Engraving Machine WMTL1610 for Metal Sheet Stainless Steel Thick WoodNegotiableMOQ: 1
-
High Quality 1300*2500mm CO2 Laser Cutting Machine Non-metal CO2 Laser Cutting MachineNegotiableMOQ: 1
-
Hot Sell CO2 RF Laser Marking MachineUS$ 7,300 - 11,500MOQ: 1 Set
-
2016 New Designed Desktop Laser Engraving Machine With CE,FDA Certification of DowellUS$ 1,700 - 2,000MOQ: 1 Set
-
Alignment Laser Engraving Machine for Cosmetic Shell BusinessUS$ 1,000 - 2,000MOQ: 1 Set
-
Germany Galvo Head Denim Jeans Laser Engraving MachineNegotiableMOQ: 1 Set
-
High Performance Ratio Acrylic/Wood/Plywood/Plastic/LGP Co2 Laser Cutting Machine With Step Motor and Belt Imported 150w ReciUS$ 8,100 - 9,800MOQ: 1 Set
