Contact Platform Support
Help Center1750mm - 3250mm Height Shifting Trolley for Transporting Table Formwork
Related Products
-
Height Adjustable Shifting Trolley for Transporting Table FormworkNegotiableMOQ: 1 Set -
Beam Clamp for Supporting the Beam Table FormworkNegotiableMOQ: 1 Kilogram
-
Lifting Forkwith Bearing Load 1 - 1.5T for Lifting Table Formwork UnitsNegotiableMOQ: 1 Bag
-
Adjustable Height Shifting Trolley for Transporting Table FormworkNegotiableMOQ: 1 Metric Ton
-
Flexible Floor Slab Table Formwork With Simple Structure Used in Highrise Buildings EtcNegotiableMOQ: 1 Square Meter
Certification:ISO9001-2008
1750mm - 3250mm height Shifting trolley for transporting table formwork
Descrition:
Shifting trolley is used for transporting the table formwork unit on the same floor. It mainly consists of two parts,
the standard device and attached frame(if needed). During transporting, push the shifting trolley to the place just
below the center of table formwork unit, adjust the height of the trolley manually by a handle, and lift the formwork unit.
Then move the trolley (with the formwork unit on it) to the designated position, lower the trolley manually, leave the
table formwork unit on the ground and finally remove the trolley.
Height:
※ Standard device
Hmin = 1750mm Hmax = 3250mm
※ Standard device with an attached frame
Hmin = 2500mm Hmax = 3900mm
Bearing load:
※ Standard device:1100kg(11kN)
※ Standard device with an attached frame:1000kg(10kN)
Move the table formwork on the same floor
Send Inquiry to This Supplier
You May Also Like
-
Steel Sheet & Plate＆Ship Plate ，AH32, DH32, EH32, AH36, DH36, EH36, A, B, D, ENegotiableMOQ: 5 Metric Tons
-
PPGI Hot Selling Dx51d/SGCC /Full Hard Prepainted Galvanized Galvalume Steel Coils PPGI /PPGLNegotiableMOQ: 1 Ton
-
65Mn Hot Rolled Steel PlateUS$ 420 - 445MOQ: 10 Tons
-
22 Gauge 4X8 Galvanized Steel Sheet for Roofing and ConstructionUS$ 400 - 1000MOQ: 1 Ton
-
Cut to Length Alloy 36 Steel Plate UNS K93603 Invar 36 Corrosion ResistingNegotiableMOQ: 10 Kilograms
-
Steel High Quality 304 316 420 Stainless Steel Plate Stainless for Building MaterialsNegotiableMOQ: 100000 Tons
-
Chromium Carbide Overlay Wear Plate WD-1900 Smooth Surface CCO Wear PlateNegotiableMOQ: 1 Square Meter
-
0.2mm-1.0mm Electromagnetic Pure Iron Sheet With Low Iron Loss for Motor LaminationsNegotiableMOQ: 500 Kilograms
-
Sliding Guide Block Cover Oil Free Graphite Plugged Pads Slide Plates Bronze Wear Plates BOLIUS$ 9.5 - 10MOQ: 1 Piece
-
Cold Rolled Electrolytic Tinplate Sheet With 2.8g/m² Tin CoatingUS$ 820 - 830MOQ: 25 Tons
