Eco - friendly Ozone Whole House Water Purifier with 50 - 60 Hz for Laundry Facility

Delivery Time:15days
Certification:CE ROHS

Eco - friendly Ozone Whole House Water Purifier with 50 - 60 Hz for Laundry Facility

PRODUCT PURPOSE

ECO Laundry Generation IIhas the main functions as below:

Soft the water

Sterilization and disinfection;

Decontamination and purification;

Energy conservation and environmental protection

No pollution

The operation of ECO Laundry Generation II is easy and convenient. As long as you install ECO Laundry Generation II properly, you simply need to operate your washing machine following manufacturer’s operation instructions. ECO Laundry Generation II will start working automatically when the washing machine starts to work, and it will automatically turn off when the washing machine stops operation.

ECO Laundry Generation II is an environmentally friendly appliance intended for using in a residential laundry facility.

ECO Laundry Generation II is designed to work with your washing machine, adopts magnetizing principle to treat the tap water firstly, then mixed active oxygen and silver ions into the magnetized water used for laundry.The processed water can wash clothes cleanly and kill bacteria on clothes without leaving any residual detergent.

TECHNICAL SPECIFICATION TABLE

Model	ECO Laundry Generation II(OLK-W-02)
Electrical	Input: AC 100-240V/50-60Hz  Output: DC 12V 3A 36W
Ozone Concentration	0.4 ~ 0.6 mg /L
Water Pressure	Minimum:15 psi  Maximum:75psi
Operating Temperature	0℃~78℃
Product dimension	477mmX242mmX103mm
NetWeight	2.0 Kgs

USE & SAFETY CONSIDERATION

Before using, please read the User’s Manual carefully.
 

Disconnect ALL power before servicing.

Do not operate the unit with the cover removed.

Maximum water inlet pressure is 75psi.

Use the supplied new hose when connect the ECO Laundry Generation II unit to your washing machine. You should replace any existing washing machine hose that is more than 2 years old, with a new one.

To prevent leakage caused by back-flow from the washing machine, do not leave your water hose disconnected. Simply turn the water off at the valve / faucet on the wall, leaving the hose connected.

Use a soft cloth dampened with water. Do not clean your ECO Laundry Generation II with harsh chemicals, abrasives or cleansers.

Do not mount the ECO Laundry Generation II unit vertically or at an angle.
 

ECO Laundry Generation II is designed for residential use only and is not intended for use in a commercial or industrial setting.

ECO Laundry Generation II can work normally in the temperature category 0℃~78℃, without components breakdown.

Replacement Parts

	Part Name	Part No.
⑥	Silver Ion Probe	ECO Laundry-P- SI
⑧	Control Module	ECO Laundry-P- PCB
⑨	PCO Cell	ECO Laundry-P- PCO
11	Oxidizing Module	ECO Laundry-P- OM

INSTALLATION REQUIREMENTS

Electrical Requirements

ECO Laundry GenerationII requires 120Volt 60Hz power on a 15amp fuse or Circuit Breaker.

A dedicated electrical circuit, equipped with an approved GFCI outlet, is recommended for supplying power to your ECO Laundry Generation II.

NEVER use an extension cord or a power adapter other than the one provided with ECO Laundry Generation II.

Water Requirements

Water pressure of 10 to 75psi is required to correctly operate your ECO Laundry Generation II.

To avoid the possibility of water damage (i.e. a hose leak) it is recommended that you al