Good Quality Wheel Loader

Detailed Product Description

Overall data
Rated load:                                            2,000kg
Operating weight:                                 17,100kg
Bucket capacity:                                    3cbm
Max. breakout force:                             165kN
Max. breakout force:                             165kN
Static tipping load:                                10,000kg
Max. breakout force:                              165kN
Static tipping load:                                 10,000kg
Max. dump clearance:                           3,180mm
Dump reach:                                           1,180mm
Dump angle:                                           not less than T45

Axles and tires
Standard:                                                 Meritor axle with dry type disc brake
Optional:                                                  ZF AP400 axle with wet type disc brake
Tire size:                                                  23.5-25 16 (L-3)

Steering system
Articulated frame, full hydraulic steering with flow amplified system, full-flow filtering
Min turning radius
Outside of bucket:                                 5,920mm
Outside of rear wheel:                          5,000mm

Engine
Caterpillar licensed 3306B engine
Type: inline, water cooled, direct injection and turbocharged
Rated power:                                         162kW (220hp)
Cylinders-bore x stroke:                       6-121 x 152mm
Displacement:                                       10.45L
Alternator:                                               28V/1,400W
Starting motor:                                       24V/7,500W
Battery:                                                    160Ah
Fuel consumption:                               235g/kWh

Hydraulic system
Type: pilot controlled joystick operation
Main oil pump:                                        100ml/r
Steering cylinder:                                   80ml/r
Relief valve setting lifting:                     20MPa
Steering:                                                  16MPa
Hydraulic cycle time (in second)
Lifting (full load):                                     5.7
Lowering (empty):                                  3.9
Dumping:                                                 1.0
Total:                                                         10.6

Transmission:                                         ZF 4WG200
Type-counter shaft power shift, semi-automatic electrical hydraulic shifting control
Converter-single-stage, single-phase, three elements torque converter
Travel speed (km/h):                              gear 1, gear 2, gear 3, gear 4
Forward:                                                    6.5, 11.5, 24, 39
Forward:                                                    6.5, 11.5, 24

Service refill capacities
Water tank:                                                23L
Fuel tank:                                                   280L
Hydraulic tank:                                          210L
Sump (engine oil):                                   22L
Front axle (gear oil):                                 36L
Rear axle (gear oil):                                 36L
Transmission:                                          45L