Contact Platform Support
Help CenterHVOF Spray Equipment
Related Products
-
Powder Coating Machine, HVOF Coating EquipmentUS$ 25000 - 25000MOQ: 1 Piece -
HVOF Spray/coating SystemNegotiableMOQ: 1 Piece
-
HVOF Spray Equipment for Coat Tungsten Carbide on Metallurgy/Machinery Spiral Push Feeder, HVOF Spray Equipment, Powder Coating MachineUS$ 24000 - 26000MOQ: 1 Piece
-
Thermal Spray Coating Service, Metallurgy/Machinery Spiral Push Feeder Tungsten Carbide HVOF Spray Coating, HVOF Spray EquipmentUS$ 20 - 80MOQ: 1 Piece
-
Plasma Spray MachineNegotiableMOQ: 1 Piece
The principal of SX-5000 HVOF equipment is: the mixture gas of oxygen and fuel gas is sent to the burning area of spray gun exit under high pressure. Then the burning gas is accelerated to form a supersonic flame with the help of peripheral compressed air. The spray powder is sent into burning flame and make a functional coating.SX-5000 consists of spray gun, powder feeding machine, control system, heat-exchanger system and pipeline system. It’s a compact equipment with the traits of easy-operating, stable working performance, low fuel consumption and high-quality coating.
Spray gun with manual and machine fixed way of operation. Gas needed: oxygen and propane (C3H8), weight: 2kg. velocity of spray particles: ≥450m/s. It can work a long time stably.
Parameters of SX-5000
| Number | Item | Parameter |
| 1 | Flame temperature | 2700ºC |
| 2 | Spray particles velocity | 500~600m/s |
| 3 | cooling | Water cooling |
| 4 | Cooling water-flow | 9.5L/min |
| 5 | Coating porosity | <1% |
| 6 | Coating strength | >70MPa |
| 7 | Powder measurement | 5-120μm |
| 8 | Fuel gas(C3H8)pressure and flow | 0.65MPa 88L/min |
| 9 | Oxygen pressure and flow | 11MPa 305L/min |
| 10 | Air pressure and flow | 0.75MPa 440L/min |
| 11 | nitrogen pressure and flow | 1 .2MPa 18 L/min |
| 12 | Hydrogen pressure | 0.35MPa |
| 13 | Spray gun outside measurement | 420×230×50 |
| 14 | Spray gun weight | 2.8Kg |
The SX-5000 powder feeding machine is used to store spray powder and send them to burning flames according to technological requirements. The feeding gas is nitrogen, which pulverizes the powder and sends the pulverized particles along with the gas to spray gun. You can regulate the feeding velocity by the localizer on the regulating control panel.
Parameters of the feeding machine
| number | item |
parameter |
|---|---|---|
|
1 |
Feeding pattern |
Pulverizing and gas pressure |
|
2 |
Volume of single can |
3.0L |
|
3 |
Feeding gas |
nitrogen |
|
4 |
Pressure of feeding gas |
1.1-1.3MPa |
|
5 |
Feeding velocity |
0~160g/min |
|
6 |
Feeding accuracy |
±1% |
|
7 |
Feeding gas flow |
400-800L/h |
|
8 |
Outside measurement of feeding machine |
500×460×1300mm |
|
9 |
Weight of feeding machine |
50Kg |
Send Inquiry to This Supplier
You May Also Like
-
Arc Spray Wire (Ultrahard Wearable Spray Wire)US$ 15 - 25MOQ: 10 Kilograms
-
Thermal Spray Wire(High-temperature and Corrosion Resistant Powder-cored)NegotiableMOQ: 1 Set
-
Arc Spray GunNegotiableMOQ: 1 Piece
-
Flame Spray PowderNegotiableMOQ: 1 Kilogram
-
Flame Spray PowderNegotiableMOQ: 1 Kilogram
-
Chromium Sputter TargetNegotiableMOQ: 1 Kilogram
-
Automatic Spray Coating MachineNegotiableMOQ: 1 Piece
-
Zinc Spray MachineNegotiableMOQ: 1 Piece
-
Aluminum Spray MachineNegotiableMOQ: 1 Piece
-
Stainless Steel Spray MachineNegotiableMOQ: 1 Piece
