Contact Platform Support
Help CenterCummins Injector Test Bench PT 200A
Related Products
-
CRI-XZ100 Common Rail Injector Test BenchNegotiableMOQ: 1 Piece -
Special Tools for Oil Pump Internal-combustion Engine Governor Computer Test Bench is Self-designedNegotiableMOQ: 1 Piece
-
Common Rail Nozzle - New Product CR EM Injector Testing System - WCRIS2000NegotiableMOQ: 1 Piece
-
Mechanical Fuel Pump Test Bench 7318311816NegotiableMOQ: 1 Piece
-
PS2000-I Diesel Fuel Injection Pump Test BenchNegotiableMOQ: 1 Piece
Cummins Injector Test Bench PT 200A
Cummins Injector Test Bench PT 200A Technical parameter
Model | Unit | PT-200A |
Camshaft speed | r/min | 1050 |
Supply fuel pressure PI | PSI | 100 |
Clamping pressure PII | PSI | 78 |
Metering range(strokes) | cc | 0-1000 |
Type of belt | 4x85x25 | |
Temperature of fuel | 382 | |
Fuel tankdimension | mm | 450x450x350 |
Power supply | 3phases, 50Hz, 380V AC | |
Input voltage | V | AC380 |
Input frequency | Hz | 50 |
Number of phases | 3 | |
Camshaft drive motor | Kw | 1.5 |
Capacity | KVA | 3.5 |
Dimension | mm | 1020x800x1470 |
Weight | kg | 450 |
Cummins Injector Test Bench PT 200A Introduct
1. Digital reading of injector output directly, minimum individual 0.1cc.
2. Clamping of the injector occurs with the camshaft stationary and in the "index" position I.E. with the injector cam at a position where tappet is at the maximum lift. The position of the datum valve cam when at the "index" position is such that the datum valve cam follower is at minimum lift which causes the datum valve to be held open by link. When the camshaft starts to turn the datum valve to close whist the injector cam and tappet are still operating on top dwell. This locks the position of piston rod and the injector body relative to the cambox leaving the injector plunger free to be operated by the injector cam.
The datum valve is opened every time the injector cam is on the top dwell allowing both pressures in the clamp chamber and the position of the injector and fixture relative to the cambox to be corrected every cycle.
3. Using the fuel arm, operator can check and adjust flow of the injector it is Unnecessary that unclamping the injector from the stand. This can assure the accuracy and raise work efficiency.
4. The injector injection intake analogous device which analogize engine work.
5. The fuel temperature was controlled by the micro-computer.
6. The stand was controlled by PLC(programmable logic controller),the electrical system is reliable.
Send Inquiry to This Supplier
You May Also Like
-
Hot Sales!!!Transistor 2N5434 MOT,New and OrignalNegotiableMOQ: 100 Pieces
-
MMBT2907 2F 0.6A/40V SOT23 SMD Triode TransistorUS$ 0.5 - 1.8MOQ: 100 Pieces
-
RA45H7687M1 RF MOSFET ModuleUS$ 2 - 3MOQ: 1 Piece
-
SOT-23 Bipolar Transistors MMBT3904US$ 0.01 - 0.1MOQ: 3000 Pieces
-
Original Transistor 1MI100H-025US$ 1 - 98MOQ: 1 Piece
-
Healthcare Touch Screen Kiosks In Medical Facilities TSK8010NegotiableMOQ: 1 Piece
-
Custom RGB Flat Panel Video Outdoor Led ScreensNegotiableMOQ: 1 Piece
-
Titanium Precision Machined Parts For Laboratory Equipments , Experimental InstrumentsNegotiableMOQ: 1 Piece
-
Touch Screen Kiosks , Coffee Internet TFT LCD Display TSK8015NegotiableMOQ: 1 Piece
-
Round Ring Flat Surface Temperature Measurement Probe 3950 For Bread Processing MachineNegotiableMOQ: 1 Piece
