Home > Electrical & Electronics > Oscillator > Medium Voltage Variable Frequency Converter AC Drive for HVAC

Medium Voltage Variable Frequency Converter AC Drive for HVAC

Medium Voltage Variable Frequency Converter AC Drive for HVAC photo-1
Negotiable MOQ: 1 Piece (Price negotiable depending on order volume and customization)
Key Specifications
Get Latest Price
Brand Name:
GANDO
Place of Origin:
China
Model Number:
1140V-G11-__KW
Payment & Shipping
Payment Methods:
Port of Shipment:
China
Delivery Detail:
7 days
Brand Name GANDO
Place of Origin China
Model Number 1140V-G11-__KW
Delivery Time:2 days
Certification:CE

Medium Voltage Variable Frequency Converter AC Drive for HVAC

A compressor is a mechanical device that takes in a medium and compresses it to a smaller volume. Compressors can either increase or decrease a given mass to a lower or higher pressure. A mechanical or electrical drive is typically connected to a pump that is used to compress the medium.

Compressors have many everyday uses, such as:

· Air conditioners, (car, home)

· Air pumps

· Home and industrial refrigeration

· High pressure car washes

· Hydraulic compressors for industrial machines

· Air compressors for industrial manufacturing


Compressors are used by many industries that depend on the power of compressed gas or fluid to power manufacturing processes of all kinds.

There are several different compressor types:

· Rotary screw compressor
Two helical rotors force gas into a chamber that decreases in size, thereby increasing the pressure of the gas. The screws in the rotary screw compressor can be lubricated with oil or non-lubricated. Oil-free compressors are used for gas that must remain clean and uncontaminated. Rotary screw compressors are typically sized from 30-200 horsepower.

· Reciprocating compressor
One or more pistons are moved inside a cylinder to increase the gas pressure. This is similar to a combustion engine without the ignition of fuel. Just like a car, the pistons generate much heat so the reciprocating compressor is typically cooled by air or water. Multi-stage reciprocating compressors pass the compressed gas from one cylinder to another, increasing the pressure in each stage. Most industrial compressors are multi-stage, ranging from one to 500 or more horsepower.

· Centrifugal compressor
Centrifugal compressors speed up and compress gas via a rotor with blades. Centrifugal force is used to force the air or gas to an outer chamber under higher pressure. Centrifugal compressors are designed to operate above 75-80% speed. Surging can occur below these speeds. This makes the centrifugal compressor ideal for continuous high duty operation.

Power range of G11 VFD

Voltage: 1140VAC (959VAC – 1311VAC)

Power: 45kw/60HP – 400kw/535HP

Specification of G11 VFD

Item

Specification

Input frequency

50/60Hz

Output frequency

0-400Hz

Overload current

150% rated current 1min.,  180% 10 sec.

Control mode

sensor-less vector control,  V/F control

Starting torque

150% 0.5Hz

Control precision

±0.2%

Torque precision

±5%

Setting frequency menthod

Plastic Extruder Machines,  multi-step speed,  simple PLC and PID.

Output frequency resolution

0.01Hz

Frequency setting signal

0~+10V; 2~+10V; 4~20mA,  0~20mA

Protection function

Over voltage, under voltage, over load, relay, overheat speed stall, grounding, instant power cut compensation( within 2 sec for operation mode. Continue to operate after the power is available), Charging protection( not to display when the dc voltage of main circuit is less than 50v), up to 29 ways.

Enclosure

IP20

Cooling mode

forced air cooling

Vibration

Less than 0.2g for 20hz

Ambient temperature / Humidity

-10 Degrees~+40 Degrees / 20~90%Rh (no condensation)

Tips:

A variable-frequency drive (VFD) is a system for controlling the rotational speed of an alternating current (AC) electric motor by controlling the frequency of the electrical power supplied to the motor. A variable frequenc

Send Inquiry to This Supplier

Message
0/5000

Want the best price? Post an RFQ now!
Business Type
Trading Company
Total Employees
101 - 200 People
Main Markets
North America, South America, Eastern Europe
Location
Shangluo, Shaanxi, China