Contact Platform Support
Help CenterMG400 930(900)-WD Electric Traction Coal Mining Machinery Coal Shearer
Related Products
-
Chainless Traction Electrical Traction Coal Mine Machinery ShearerNegotiableMOQ: 1 Piece -
New Electra Shearer Electrical Traction Coal Mine Machinery ShearerNegotiableMOQ: 1 Piece
-
200kw / 250kw Electrical Traction Coal Mine Machinery ShearerNegotiableMOQ: 1 Kilogram
-
MG2100(125)/471(571)-WD AC Electric Traction Coal Mine Machinery ShearerNegotiableMOQ: 1 Piece
-
30T 1140V AC Electric Traction Coal Mine Machinery ShearerNegotiableMOQ: 1 Piece
Certification:ISO
MG400 930(900)-WD Electric Traction Coal Mining Machinery Coal Shearer
The machine is a new designed on-board AC frequency coversion speed regulation shearer according to the requirements of customers and more than 10 years practice for AM 500 as well as other electric shearers on the basis of Chiness situation and ideal equipment to realize high productivity for coal minings.
Technical feature
1.Multi-motor mouldular construction, the cutting motor is in the ranging arm, no power transfer between the arm and body, the bevel gear and complicated shaft, back wheel etc are cancelled, using simple pros to hinge with mainframe.
2.On-board AC frequency converting speed regulation, SUPER TRAC chainless traction system, low frequency start-up , large pulling force, constant power stepless speed regulation.
3.Intergral (or several) mainframe, the reverse cutting force from drum, support force of cylinder, reverse action force of traction drive as well as supporting positioning, guiding of face conveyor are all borne by the simple constructive and rigid mainframe, each unit can easily handling from the gob side of mainframe with reliable application and service.
4.The key parts adopt foreign import parts such as bearings seals, pumps and frequency converter, the overload testing is made for the drive parts so that the machine has high reliability.
5.The machine uses the series design with better adaptability and generality, the ranging arm and traction drive box and independent haulage can exchange each other left and right, only the idle wheel of independent haulage and swing angle of arm as well as drum diameter are changed, the requirement of 1.6~4.5 m mining height can be met, the ranging arm motor and haulage motor each has three different size of power for choice and can exchange right and left.
6.The pick type high power drum can be used on hand coal seam and the seam with stone.
7.The main components of water and hydraulic system are located in multi-way block to reduce works for pipe connection and service.
8.The control system adopts the computer center control with such function as pilot monitor, operation protection, display of run and fault, data store, fault self diagnose memory, power auto banlance etc. The control is intellectualized, the water cooling motor has tempreature protection, the haulage system can located the speed limit protection device and zero speed auto braking unit. Prewarning device may be assorted if required, 485 communication interface can be reserved as well.
Technical Parameters
|
Parameters |
400/900-WD |
400/930-WD |
Parameters |
400/900-WD |
400/930-WD |
|
Mining height |
2.2~3.5 mm |
2.2~3.5/2.5~4.5 mm |
Haulage pull |
500~300 kn |
750~450 kn |
|
Machine height |
1593 mm |
1579/1964 mm |
Dust surppression |
In-out mist spray |
In-out mist spray |
|
Inclination |
≤16° |
≤25° |
Haulage center distance |
5970 mm |
6325 mm |
|
Supply voltage |
3.3 kv |
3.3/1.1 kv |
Ratory center distance of arm |
7520 mm |
7875 mm |
|
Installed power |
900 (400×2＋40×2＋20) |
930 (400×2＋55×2＋20) |
Overal dimention of |
7770mm× 1470mm× 1230mm |
8125mm× 1470mm× 1230mm |
|
Length of arm |
2168 mm |
2168/2495 mm |
Send Inquiry to This Supplier
You May Also Like
-
Fan Belt Genuine 2614B655 is Suitable for Perkins 1104A Engine SeriesNegotiableMOQ: 1 Piece
-
Genuine Gates Powergrip Timing Belt 06A109119J L06A109119J 90138X23 Gates Belt for Skoda 1999-2007US$ 9.47 - 9.47MOQ: 1 Piece
-
Agricultural Belt for YAMMAR 85G V-belt Harvester Belt for MachineNegotiableMOQ: 1
-
41x54x11 Motorcycle Front Fork Damper Oil Seal for HondaNegotiableMOQ: 1
-
6mm Felt Nomex Blanket for Rotary Calender Press Sublimation MachineUS$ 15 - 35MOQ: 1 Piece
-
Tensioner Belt Automotive OEM 14400-RCA-A01 Timing Belt For CarsUS$ 6 - 7MOQ: 10 Pieces
-
Hot Sales DK31 Electrombile Switch With Rocker ButtonUS$ 3.1 - 10MOQ: 1000 Pieces
-
Accessories of Motorcycle Control CableUS$ 0.01 - 0.3MOQ: 1000 Pieces
-
Motorcycle Brake LeverUS$ 1 - 10MOQ: 1 Piece
-
Different Sizes Sanmen Manufacturer Good Quality V-ribbed BeltUS$ 0.25 - 0.3MOQ: 10 Pieces
