Pneumatic Booster Machine

1.The C-body design, use small space and easy to operate.
2.Using the Principle of supercharger, get high speed and large output forces.
3. No hydraulic system noise, can save electricity consumption and thus reduce production costs.
4. Output adjustment as easy as adjusting the air pressure, can achieve the required pressure.
5. Safety designed, using both hands to operate, with emergency stop button and jog up and down function.
6. Key and Foot Switch two cycle start modes. Pressure Speed can be adjusted.
7. Widely used in parts of the press forming, stretching, bending, punching, stamping, shaft alignment and press-fit etc.
Technical parameters:
Max working height 230mm
Total stroke 100mm
Pressure stroke 15mm
The size of the working table 280x240mm
Pressure 0.4-0.7Mpa
Mold mounting hole φ25mm
Power AC220V,50HZ
Using pressure  Theory pressure  Theory pressure  Theory pressure

0.4Mpa           6.88KN(112kgf)   13.49KN(181kfg)   25.75KN(181kfg)

0.5Mpa           8.75KN(140kgf)   16.93KN(227kfg)   32.33KN(227kfg)

0.6Mpa           10.17KN(168kgf)   20.33KN(272kfg)  38.57KN(272kfg)

0.7Mpa           11.82KN(196kgf)   23.61KN(317kfg)    44.87KN(317kfg)

Defferent capacity of the machine ,the special request of the stroke,the working table are also pavailable.
We can also design the specail hydraulic press machine,hydraulic riveting machine,pneumatic machine for your actual needs.
Welcome to contact me at anytime.