Contact Platform Support
Help Center
Related Products
-
Microwave Oven Door Endurance TesterNegotiableMOQ: 1 Piece -
Abrasion Strength TesterNegotiableMOQ: 1 Piece
-
Calibration Device for SpringNegotiableMOQ: 1 Piece
-
Appliance Stability TesterNegotiableMOQ: 1 Piece
-
Test Device Suitable for Checking Security of Lampholder ContactsNegotiableMOQ: 1 Piece
Automatic Cord Reels Endurance Tester
Product details:Model ZLT-JX.
The device is used to detect automatic cord reels, and it confirms to IEC60335-1 clause 22.16.
Two-thirds of the length of the cord is unreeled. If the withdrawable length of the cord is less than 225 cm, the cord is unreeled so that a length of 75 cm remains on the reel. An additional length of 75 cm of the cord is then unreeled and pulled in a direction so that the greatest abrasion occurs to the sheath, taking into account the normal position of use of the appliance. Where the cord leaves the appliance, the angle between the axis of the cord during the test and the axis of the cord when it is unreeled without substantial resistance is approximately 60°. The cord is allowed to be recoiled by the reel.
Note 1: If the cord does not recoil at the angle of 60°, this angle is adjusted to the maximum that will allow recoil.
The test is carried out 6 000 times at a rate of approximately 30 times per minute or at the maximum rate allowed by the construction of the cord reel if this is less.
Note 2 :It may be necessary to interrupt the test to allow the cord to cool.
|
Power Supply |
220V 50Hz or 115V 60Hz |
|
Gas Pressure |
0.6Mpa |
|
Pull |
1.2m |
|
Testing Frequency |
30 times/min |
|
Conform to standard |
IEC60335 clause 22.16 |
Include: multi-function clamp
Send Inquiry to This Supplier
You May Also Like
-
Endress+Hauser E+H Compact Conductivity Device Smartec CLD18-BGGENegotiableMOQ: 1 Piece
-
Low Cost Universal Testing Machine Laboratory Tensile Testing MachineUS$ 3000 - 10000MOQ: 1 Set
-
OMP60 Renishaw Probe A-4038-0001-21 A-4038-0002 Original and NewNegotiableMOQ: 1 Piece
-
Universal Tensile Strength Testing Equipment Tensile Tester for Plastics and Polymers ASTM E8 Universal Tensile Tester for MetalsUS$ 3000 - 10000MOQ: 1 Set
-
ASTM D638 Tensile Testing Machine for Plastics Tensile Strength Tester for Rubber Materials Electronic Universal Testing MachineUS$ 3000 - 10000MOQ: 1 Set
-
Floor Type Universal Tensile Tester Tensile Testing Machine for Metals and Alloys ASTM D412 Rubber Tensile Testing MachineUS$ 3000 - 10000MOQ: 1 Set
-
ASTM D5035 Fabric Tensile Strength Tester Universal Tester for Construction Materials Tabletop Universal Testing MachineUS$ 3000 - 10000MOQ: 1 Set
-
Micro Tensile Testing Machine Tensile Testing Equipment for Composites ASTM D882 Thin Plastic Film Tensile TesterUS$ 3000 - 10000MOQ: 1 Set
-
ISO 527 Tensile Strength Tester Tensile Testing Machine for Wires and Cables High Capacity Universal Testing MachineUS$ 3000 - 10000MOQ: 1 Set
-
Dual Column Universal Tensile Tester UTM Machine for Paper and Cardboard ISO 13934-1 Textile Tensile TesterUS$ 3000 - 10000MOQ: 1 Set
