Contact Platform Support
Help Center
Related Products
-
Calibration Device for SpringNegotiableMOQ: 1 Piece -
Appliance Stability TesterNegotiableMOQ: 1 Piece
-
Test Device Suitable for Checking Security of Lampholder ContactsNegotiableMOQ: 1 Piece
-
Test Device Suitable for Winding a Flexible PipeNegotiableMOQ: 1 Piece
-
Screwed Glands TesterNegotiableMOQ: 1 Piece
Abrasion Strength Tester
Product details: Model ZLT-GC1.
The device is used to check abrasion strength of printed circuit boards scratches are made across five pairs of conducting parts and the intervening separations at points where the separations will be subject to the maximum potential gradient during the tests.
The scratches are made by means of a hardened steel pin, the end of which has the form of a cone having a tip angle of 40°, its tip being rounded and polished, with a radius of 0,25 mm ± 0,02 mm. Scratches are made by drawing the pin along the surface in a plane perpendicular to the conductor edges at a speed of 20 mm/s ± 5 mm/s. The pin is so loaded that the force exerted along its axis is 10 N ± 0,5 N.
The scratches shall be at least 5 mm apart and at least 5 mm from the edge of the specimen.
|
Power Supply |
220V 50Hz or 115V 60Hz |
|
Tip Angle of Steel Pin |
40° |
|
Radius of Steel Pin |
0,25 mm ± 0,02 mm |
|
Scratche Speed |
20 mm/s ± 5 mm/s |
|
Force |
10 N ± 0,5 N |
|
Scratche Angle |
80-85° |
|
Scratche Distance |
Adjustable |
|
Control System |
PLC |
|
Worktable |
eddy |
|
Conforms to Standard |
IEC60335-1 clause21.1,IEC60950 clause 2.10.8.4 |
Send Inquiry to This Supplier
You May Also Like
-
Endress+Hauser E+H Compact Conductivity Device Smartec CLD18-BGGENegotiableMOQ: 1 Piece
-
Low Cost Universal Testing Machine Laboratory Tensile Testing MachineUS$ 3000 - 10000MOQ: 1 Set
-
OMP60 Renishaw Probe A-4038-0001-21 A-4038-0002 Original and NewNegotiableMOQ: 1 Piece
-
Universal Tensile Strength Testing Equipment Tensile Tester for Plastics and Polymers ASTM E8 Universal Tensile Tester for MetalsUS$ 3000 - 10000MOQ: 1 Set
-
ASTM D638 Tensile Testing Machine for Plastics Tensile Strength Tester for Rubber Materials Electronic Universal Testing MachineUS$ 3000 - 10000MOQ: 1 Set
-
Floor Type Universal Tensile Tester Tensile Testing Machine for Metals and Alloys ASTM D412 Rubber Tensile Testing MachineUS$ 3000 - 10000MOQ: 1 Set
-
ASTM D5035 Fabric Tensile Strength Tester Universal Tester for Construction Materials Tabletop Universal Testing MachineUS$ 3000 - 10000MOQ: 1 Set
-
Micro Tensile Testing Machine Tensile Testing Equipment for Composites ASTM D882 Thin Plastic Film Tensile TesterUS$ 3000 - 10000MOQ: 1 Set
-
ISO 527 Tensile Strength Tester Tensile Testing Machine for Wires and Cables High Capacity Universal Testing MachineUS$ 3000 - 10000MOQ: 1 Set
-
Dual Column Universal Tensile Tester UTM Machine for Paper and Cardboard ISO 13934-1 Textile Tensile TesterUS$ 3000 - 10000MOQ: 1 Set
