Contact Platform Support
Help Center
Related Products
-
Ball Pressure TesterNegotiableMOQ: 1 Piece -
Apparatus for Compression Test for the Verification of Resistance to HeatNegotiableMOQ: 1 Piece
-
Apparatus to Verify the Fixation of Pins in the Body of the PlugNegotiableMOQ: 1 Piece
-
Apparatus for Pressure Test at High TemperatureNegotiableMOQ: 1 Piece
-
Apparatus for Compression TestNegotiableMOQ: 1 Piece
Flexible Cable Torque Tester:
Product details:Model ZLT-LJ3.
This tester is conforms to IEC60884-1 clause 23.2.After testing cord retention. the flexible cable is subjected for 1 min to a torque as specified in following table .
Torque test values for cord anchorages
|
Rating of plug or portable socket-outlet |
Flexible cable
(number of cores × nominal cross-sectional area in mm2) |
||||
|
2*0.5 |
2*0.75 |
3*0.5 |
3*0.75 |
(2 or more)*1 |
|
|
Up to and including 16A and 250V |
0,10Nm |
0,15Nm |
0,15Nm |
0,25Nm |
0,25Nm |
|
16A and above 250V |
|
|
|
|
0,35Nm |
|
Above 16A |
|
|
|
|
0,425Nm |
After the tests, the flexible cable shall not have been displaced by more than 2 mm. For rewirable accessories, the end of the conductors shall not have moved noticeably in the terminals; for non-rewirable accessories, there shall be no break in the electrical connections.
For measurements of the longitudinal displacement, a mark is made on the flexible cable at a distance of approximately 20 mm from the end of the specimen or the flexible cable guard, before it is subjected to the pull.
If, for non-rewirable accessories, there is no definitive end to the specimen or the flexible cable guard, an additional mark is made on the body of the specimen.
The displacement of the mark on the flexible cable in relation to the specimen or flexible cable guard is measured while the flexible cable is subjected to the pull.
|
Weight |
2N/3N/5N/7N/8.5N*1 |
|
Conforms to standard |
IEC60884 clause23.2(table 18),VDE0620 clause23.2(table18) |
Send Inquiry to This Supplier
You May Also Like
-
High Quality Computerized Electronic Universal Ceramic Materials 3 Point Bending Testing Laboratory Equipment 50knUS$ 4500 - 10000MOQ: 1 Set
-
SKF TKSA 11 Affordable Shaft Alignment ToolNegotiableMOQ: 100 Pieces
-
Hydraulic Plastic Flange Connections Cover Plugs SHF SeriesUS$ 0.22 - 0.28MOQ: 2500 Pieces
-
Impact Testing MachineUS$ 950 - 1350MOQ: 1 Piece
-
Gates 550C 550U U550 U-550 U508 U-508 Japan Unitta U-550 Belt Tension Meter New U-508 Belt Tension Meter Upgraded Version U550US$ 1 - 900MOQ: 1 Piece
-
Plastic Packaging Film Heat Seal Tester/Laboratory Heat Sealer / Five Points Heat Seal TesterUS$ 9,500 - 10,000MOQ: 1 Set
-
Diesel Fuel Injection Pump Test Bench Simulator System Control InstrumentUS$ 200 - 300MOQ: 1 Set
-
Analytical Balanace.scale ,weichengya Laboratory SupplierUS$ 10 - 35MOQ: 10 Sets
-
Smart MD-3051 Online Density Meter With 4-20mA OutputUS$ 2,380 - 2,500MOQ: 1 Unit
-
5W-300W Sun Simulator Watt Testing 30% Off / Xenon Lamp Sun Simulator Free Sent / Sun Simulator TestingUS$ 7,500 - 10,000MOQ: 1 Set
