Contact Platform Support
Help CenterTumbling Barrel Tester
Related Products
-
Apparatus for Abrasion Test on Insulation Sleeves of Plug PinsNegotiableMOQ: 1 Piece -
Plug Torque TesterNegotiableMOQ: 1 Piece
-
Apparatus for Impact Test at Low TemperatureNegotiableMOQ: 1 Piece
-
Apparatus of Checking Damage to ConductorsNegotiableMOQ: 1 Piece
-
Apparatus for Testing Cord RetentionNegotiableMOQ: 1 Piece
Tumbling Barrel Tester:
Application
The Tumbling Barrel Test simulates repeated falls which may occur to such devices as connectors or small remote control units which are normally attached to cables during use.
The Tumbling Barrel Tester is the recommended instrument to perform such a test. A barrel is turned at a rate of five revolutions per minute resulting in ten falls per minute. The sample falls from a height of 500mm on to a steel plate that is 3mm thick and backed by 19mm thick hardwood. The number of falls is set by the user in accordance to the standard they are meeting. After the tumble barrel procedure, the specimen is checked visually, mechanically, and electrically as prescribed in the relevant specification.
Product details:Model ZLT-GT1/2: The ZLT Tumbling Barrel Tester is made to the specifications set forth in major international standards.
The ZLT Tumbling Barrel Tester employs a large clear acrylic access door for easy viewing and access to the chamber. Models are offered with a standard barrel with a drop height of 500mm. Barrels of other sizes are available as well for standards such as IEC 60312 or DIN 60312 where a drop height of 800mm (or 1000mm)is required.
|
Model |
ZLT-GT1 |
ZLT-GT2 |
|
Power Supply |
220V 50Hz or 115V 60Hz |
220V 50Hz or 115V 60Hz |
|
Barrel Wall Thickness |
3mm |
1.5mm |
|
Inner Height |
650mm |
675mm or 1175mm(for 1m fall height) |
|
Fall Height |
500mm |
500mm or 1000mm |
|
Chute Length |
275mm |
275mm |
|
Bottom Impact Surface |
3mm steel |
3mm steel backed with 19mm hardwood |
|
Dimension |
W*D*H=630mm x 600mm x 1250mm |
W*D*H=630mm x 600mm x 1250mm |
|
Conforms to standard |
VDE0620,IEC60598-1 |
IEC68-2-31(2008),IEC68-2-32,IEC884 IEC320-1,IEC60238,EN50075 |
|
|
|
|
Send Inquiry to This Supplier
You May Also Like
-
Endress+Hauser E+H Compact Conductivity Device Smartec CLD18-BGGENegotiableMOQ: 1 Piece
-
Constant Temperature Oven Drying Oven for Pharmaceuticals Constant Temperature Drying Oven PriceUS$ 1000 - 5000MOQ: 1 Set
-
Hydraulic Plastic Flange Connections Cover Plugs SHF SeriesUS$ 0.22 - 0.28MOQ: 2500 Pieces
-
HST Spring Dyno Friction Leakage Fatigue Testing MachineUS$ 5000 - 10000MOQ: 1 Set
-
Gates 550C 550U U550 U-550 U508 U-508 Japan Unitta U-550 Belt Tension Meter New U-508 Belt Tension Meter Upgraded Version U550US$ 1 - 900MOQ: 1 Piece
-
Analytical Balanace.scale ,weichengya Laboratory SupplierUS$ 10 - 35MOQ: 10 Sets
-
Smart MD-3051 Online Density Meter With 4-20mA OutputUS$ 2,380 - 2,500MOQ: 1 Unit
-
5W-300W Sun Simulator Watt Testing 30% Off / Xenon Lamp Sun Simulator Free Sent / Sun Simulator TestingUS$ 7,500 - 10,000MOQ: 1 Set
-
New Design Measuring Meter With Best PerforanceUS$ 1,000 - 1,200MOQ: 1 Piece
-
XK-1 Rotary Switch Life TesterNegotiableMOQ: 1 Set
