Contact Platform Support
Help CenterRTV 2 Silicon Rubber for Soap Mold Making
Related Products
-
RTV 2 Silicone Rubber for Gypsum Product Mold MakingUS$ 5.40 - 7.80MOQ: 200 Meters -
RTV 2 Silicone RubberUS$ 5.40 - 7.80MOQ: 200 Meters
-
RTV 2 Silicone Rubber for Resin CraftsUS$ 5.40 - 7.80MOQ: 200 Meters
-
RTV 2 Silicone Mold Making Rubber Materials for Plaster &resin Artwork Mold MakingUS$ 5.40 - 7.80MOQ: 200 Meters
-
RTV 2 Silicon Rubber for Resin ProductsUS$ 5.40 - 7.80MOQ: 200 Meters
RTV 2 silicon rubber for soap mold making
Application of RTV 2 silicon rubber is mainly used for molds making such as reproduction of poly resin, epoxy, polyurethane-polymer, plaster, gypsum, soaps, candle & lighting, architecture, decorative article and craftwork, plastic toy, gift and stationery, big statue, cultural relic product, etc..
Datasheet of RTV 2 silicon rubber for soap mold making:
| Model | HongYe RTV 628# |
| Appearance | adjustable |
| Mixing Ratio (%) | 2-4% |
| Operating time (mins 25 0C ) | 30-60mins |
| Curing time(hours 25 0C) | 2-5hours |
| Hardness (A°) | 28±2 |
| Viscosity (Mpas -25 0C) | 22000±1000 |
| Elongation-break(%) | ≥ 400 |
| Tensile strength(kgf/cm2) | 42±2 |
| Tear-strength(kgf/cm) | 26±2 |
TECHNICAL GUIDELINES of RTV 2 silicon rubber for soap mold making:
Step One to use RTV 2 silicon rubber:Take 100g of part A and add 2g of part B and mix the silicon rubber and the curing agent evenly.
Step Two to use RTV 2 silicon rubber: vacuum pumping
Without exception, this takes less than 10 minutes. Otherwise, it will cause cross linking reaction, and no more further steps will be available.
Step Three to use RTV 2 silicon rubber: Brushing cast & Perfusion Molding operation.
Curing agent and silicon proportion and their reaction of RTV 2 silicon rubber products:
1Added with 1 of curing agent, RTV 2 silicon rubber can still flow within 2.5 hours, mold can be released in 6-8 hours.
2Added with 2 of curing agent, RTV 2 silicon rubber can still flow within 50 minutes to 1 hour, mold can be released in 23 hours.
3Added with 3 of curing agent, RTV 2 silicon rubber can still flow within 2830 minutes, mold can be released in 1.52 hours.
Any questions of RTV 2 silicon rubber for soap mold making, please feel free to contact Ms Vicky:
Mail: hyz(at)szrl(dot)net
TEL: 0086-755-89948013
FAX: 0086-755-89948030
MOBILE: 0086-13751020433
Send Inquiry to This Supplier
You May Also Like
-
Non-yellowing TPU Polyurethane Adhesive for Shoe Sole LaminationUS$ 2.22MOQ: 1 Kilogram
-
50ml Loctite Screw Glue 290 Penetrating Medium Strengthanti-loose Metal Thread Locking Agent 222 243 242NegotiableMOQ: 1 Bag
-
Low Temperature Hot Melt Adhesive for Baby Diaper and NapkinsUS$ 2.8 - 3.2MOQ: 1 Ton
-
2016 Zhengzhou Factory Natural Artificial Stone Mold for Making Artificial StoneUS$ 1 - 30MOQ: 1000 Pieces
-
Hot Seal de High Quality Silicon Rubber Bushing From China O RingsUS$ 0.1 - 10MOQ: 100 Pieces
-
Aluminum Foil Self-adhesive TapeNegotiableMOQ: 100 Rolls
-
Glue Stick, Hot Melt Glue Stick, Glue Gun StickUS$ 2.9 - 2.9MOQ: 100 Kilograms
-
Best Quality Cheapest Animal Shape Silicone Rubber Oven MittsNegotiableMOQ: 2000 Pieces
-
8 Pieces in a Pack Super GlueUS$ 0.33 - 0.33MOQ: 1800 Sets
-
Mmodified Corn StarchUS$ 675 - 705MOQ: 10 Tons
