Contact Platform Support
Help CenterAddition Cure Molding Silicone
Related Products
-
Addition Cure Silicone RubberUS$ 7.80 - 12.50MOQ: 200 Meters -
RTV Silicone Rubber for PadUS$ 6.80 - 12.50MOQ: 200 Meters
-
Silicone Rubber Printing Pads MaterialsUS$ 6.80 - 12.50MOQ: 200 Meters
-
Molding Silicone for Concrete ProductsUS$ 5.40 - 7.80MOQ: 200 Meters
-
Silastic RTV-2 SiliconeUS$ 5.40 - 7.80MOQ: 200 Meters
Application of Addition cure silicone rubber:
HY- E642# addition molding silicone could be mainly used for making concrete stones, precision molds, PU molds, resin molds, gypsum casting, candle molding,for life casting, fabric finishing, seal for electronic components and solar circuit board, trademark decoration. etc.
Technique Data of HY-E642# molding silicone
|
Model |
HY-E642# |
|
Appearance |
Translucent |
|
Mixing Ratio |
1:1 |
|
Operating time (Mins 25°C) |
30 - 40 |
|
Curing time (Mins 25°C) |
120 - 240 |
|
Curing time (Mins 60°C) |
20 - 30 |
|
Hardness (A°) |
42±2 |
|
Density ( g/cm 3 ) |
1.08 |
|
Viscosity (CS) (Part A) |
30000 ± 5000 |
|
Viscosity (CS) (Part B) |
5000 ± 500 |
|
Viscosity (CS) (After mixed) |
10000 ± 2000 |
|
Tensile-strength( kgf /cm2 ) |
100 ± 20 |
|
Tear-strength (kgf /cm2 ) |
15 ± 2 |
|
Elongation-break(%) |
350 ± 20 |
|
Retractility(%) |
≤0.1 |
OPERRATING INSTRUCTION of HY-E642# addition cure silicon rubber
1. Stir part A and part B with right mixing ratio (1:1) evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)
2. Enclose the product (the original model) with four plastic plates or wooden plates.
3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.
4. Pour the mixture with correct mixing ratio into the model frame.
After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .
Any further information required of addition cure silicone rubber, pls feel free to contact Ms Vicky
Mail: hyz(at)szrl(dot)net
Mobile: 0086-13751020433
Tel: 0086-755-89948013
Fax: 0086-755-89948030
Send Inquiry to This Supplier
You May Also Like
-
Solvent Based Thermoplastic TPU Adhesive for Fabric and Garment ApplicationUS$ 2.22MOQ: 1 Kilogram
-
Silicone & ProductsNegotiableMOQ: 2400 Kilograms
-
50ml Loctite Screw Glue 290 Penetrating Medium Strengthanti-loose Metal Thread Locking Agent 222 243 242NegotiableMOQ: 1 Bag
-
Low Temperature Hot Melt Adhesive for Baby Diaper and NapkinsUS$ 2.8 - 3.2MOQ: 1 Ton
-
2016 Zhengzhou Factory Natural Artificial Stone Mold for Making Artificial StoneUS$ 1 - 30MOQ: 1000 Pieces
-
Hot Seal de High Quality Silicon Rubber Bushing From China O RingsUS$ 0.1 - 10MOQ: 100 Pieces
-
Aluminum Foil Self-adhesive TapeNegotiableMOQ: 100 Rolls
-
Glue Stick, Hot Melt Glue Stick, Glue Gun StickUS$ 2.9 - 2.9MOQ: 100 Kilograms
-
Best Quality Cheapest Animal Shape Silicone Rubber Oven MittsNegotiableMOQ: 2000 Pieces
-
8 Pieces in a Pack Super GlueUS$ 0.33 - 0.33MOQ: 1800 Sets
