Multi Jet Dry Type Vane Wheel Water Meter
Set of moving device that fitted into a closed conduit driven directly by water flow. Its turbine rotor rotates about the axis which is perpendicular to water flow.
WORKING PRINCIPLES:
Water flow drives vane rotate. Rotating times which is proportional to water flow speed are gathered, hence total volume passed through water meter is recorded.
CHARACTERS:
1. Multiple-jet, dry, magnetic drive.
2. Vacuum sealed counter, frost proven, keeping clear reading for long,
3. Antimagnetic construction.
4. Meter body made of either brass.
5. Outside or inside adjustable meter body.
6. For hot or cold water, remote transmission device can be added upon request.
7. All technical figures are conformed with GB/T778.1~3-1996 which is equivalent to ISO4064 Standard Class B.
WORKING CONDITION:
. Water temperature≤45º C(Hot water meter≤90º C)
. Water pressure≤1Mpa
MAXIMUM PERMISSIBLE ERROR:
. From the minimum flow-rate (qmin) inclusive to the lower zone of the transitional ---flow-rate (qt) exclusive: ± 5%.
. From the transitional flow-rate (qt) inclusive to the higher zone of the maximum -----flow-rate (qmax) exclusive: ± 2%(hot water meter± 3%.)
Send Inquiry to This Supplier
You May Also Like
-
Forged Brass Water Meter Body FittingsUS$ 0.1 - 0.1MOQ: 100 Pieces
-
Hot Selling Small Digit Water Meters Box With High QualityUS$ 14.6 - 15.3MOQ: 1 Piece
-
50mm Pipe Fitting Y-strainerUS$ 7 - 20MOQ: 100 Pieces
-
3/4 Inch Pipe Fitting Y-strainer SS Stainless SteelUS$ 7 - 20MOQ: 100 Pieces
-
3/4 Inch Pipe Fitting Y-strainer SS Stainless Steel Flange EndUS$ 7 - 20MOQ: 100 Pieces
-
Water Flow Meter For Sewage Treatment Or IrrigationUS$ 45 - 1,500MOQ: 1 Piece
-
100mm 4" MODBUS-RTU Bulk Water Meter for IrrigationUS$ 115 - 1,500MOQ: 100 Pieces
-
25mm Dry Type Class B 3/4 Inch Brass Body Multi Jet Water Flow MeterUS$ 8 - 55MOQ: 1 Piece
-
LXSG 25 Multi Jet Super Dry Type Cast Iron Flow Water MeterUS$ 8 - 20MOQ: 1 Piece
-
Impulse Transfer Vertical Flow Water MeterUS$ 6 - 20MOQ: 5 Pieces