Contact Platform Support
Help Center
Related Products
CNC round pipe Flame & Plasma Cutting Machine is mechanical-electrical integrated product, being controlled by industrially-controlled computer, driven by AC servo motor and stepping motor, 5 axes（A、X、Z、B、W）, coordinatedfully-digitalized cutting.
Control software can satisfy the requirements
Using oxygen, propane, flame cutting and plasma cutting.
Can cut low carbon steel, stainless steel, aluminum alloy.
This machine can cut multi-kinds of intersection holes on the main pipe, can also cut multi-kinds of intersection joint on the end of branch pipe. Can cut bevel with fixed and variable angle outside the above-mentioned intersection hole and intersection joint.
This machine adopts multi kinds of measures to improve anti-interference capability(photoelectric insulation, well-grounded, shielded protection)
This machine has played a leading role in the sector of domestic pipe cutting machine.
This machine has complete control and cutting function.
1.2 Control function and cutting function:
1.2.1 optional programme forcutting parameter of single shape
1.2.2 combined programme for cutting parameter of multi shapes
1.2.3 off-line programme, CAD graph, manual input and disk input(optional)
1.2.4 display in Chinese language , graph interface, human-computer dialogue.
1.2.5 multi-speed control
Start up, stop, accelerate, decelerate control;
Automatic calculation for synthetic speed
Adjusting speed by manually-intervention(10%)
fast positioning control for CNC Axes；A axle positioning speed 0-10（R/MIN）
Positioning accuracy≤0.5MM（arc length）
X axle positioning speed 0-5 （M/MIN）
Positioning accuracy≤0.5MM
1.2.7 bevel cutting control with fixed and variable angle
1.2.8 off-line ignition, preheating and piercing control
1.2.9 return and re-return control following original track
1.2.10 graphic display, analogous cutting process and synchronous trace display during cutting process
1.2.11 height control
1.2.12 automatic trouble shooting and alert
1.3 cutting function
1.3.1 can cut inserting type or riding type intersection joint on the main pipe, satisfying the condition of decentred and non-decentred vertical joint , oblique joint between the axis line of branch pipe and the axis line of main pipe.
1.3.2 can cut inserting type or riding type intersection joint on the end of branch pipe, satisfying the condition of decentred and non-decentred vertical joint , oblique joint between the axis line of branch pipe and the axis line of main pipe.
1.3.3 sequential cutting function at the pipe’s both ends when installed to the chuck.
1.3.4can cut the bevel with fixed and variable angle along the above-mentioned line.
1.3.5 can cut off pipe.
1.4 standard drawing base
Off centre perpendicularity, off centre obliquity, decentred perpendicularity, decentred obliquity, perpendicular elliptical hole.
2. Main technical specification
2.1 designed cutting size（mm）
Outer diameter×wall thickness×length 600×25×6000(12000)
2.2 Max. diameter of cutting round pipe（mm）
When pipe not passing through main axis hole 600(800, 1200)
When pipe passing through main axis hole: 219
2.3 Min. diameter of cutting pipe(mm)75
2.4. Max.length of cutting pipe: 6000(800, 1200)
2.5 Diameter of cutting hole on the pipe:60-1200
2.6 wall thickness(mm)
flame 5-25
plasma(according to power supply) 1.6-15
2.7 Max. CNC stroke of X axis(mm) 6000(800, 12000)
2.8 Max. CNC stroke of Z axis(mm)） 400, 580
2.9 extreme swing angle on the relative vertical position of B axle
flame 60°
plasma 45°
2.10 extreme swing angle on the relative vertical position of W axle
flame 60°
plasma 45°
2.11cutting speed（mm/min）
flame 70～700
plasma ≤1500
Send Inquiry to This Supplier
You May Also Like
-
CNC Number Fabrication Metal Stamped Parts For Car Parts With Zinc PlatedNegotiableMOQ: 1 Metric Ton -
PAN (Round Drum) Rigidized Carbon/Graphite Fibre Board(100mm)NegotiableMOQ: 1 Metric Ton
-
Stainless Automotive Fastenings Custom Auto Parts CNC MachiningNegotiableMOQ: 1 Metric Ton
-
High Precision Aluminum CNC Machining Parts Custom Aluminum Metal FabricationNegotiableMOQ: 1 Metric Ton
-
Carbon Conductive ThreadUS$ 2 - 3MOQ: 1000 Meters
-
Balancer for Steel Bar Connection Machine Accessoires Rebar Equipment Spare PartsNegotiableMOQ: 1 Metric Ton
-
Motor Ring Strong Neodymium Magnets N50 / N52 With Epoxy / Parylene CoatingUS$ 0.01 - 2MOQ: 1 Metric Ton
-
Elevator Decoration , Stainless Steel Hairline Panel Car WallNegotiableMOQ: 1 Metric Ton
-
Car Horizontal CNC Milling CNC Aluminum Milling Tools With Zinc PlatingNegotiableMOQ: 1 Metric Ton
-
Sell Carbon BlackNegotiableMOQ: 1 Metric Ton
