Outdoor Line Aray Loudspeaker Rcf Line Array (W-210 / W-250)

W-210 is a line array system which is made of two 10" neodymium woofers, two 1.75" titanium neodymium compression drivers and high-performance low-distortion compression driver with innovative horn design of waves phase philosophy. It is a zero interfere line array with multi- speaker combined to produce accurate directivity and maximum dynamic impact. Wherever low frequency extension is required, a W-210 will integrate seamlessly with W-250 line array sub-bass system in a standard configuration. Each enclosure is equipped with rigging system, allowing flown array to be constructed rapidly and safely. W-210 is very versatile and scalable for a wide range of applications in touring performance, corporate and fixed installation fields. 

DESCRIPTION and APPLICATION 
W-250 is dedicated high performance sub-bass system designed to augment the low frequency output of the W-210, W-250 is a sub-bass enclosure which must be flown with W-210. So its physical dimensions are identical to the W-210 and it is equipped with the same proprietary rigging system. It features with twin 15" neodymium woofers with magnet structure and suspensions engineered for maximum linear excursion. 

Model W-210/W-250 
Type Line array system 
Line array sub-bass system(W-250) 

Frequency Response 55Hz-20kHz± 3dB 
40Hz-150Hz± 3dB(W-250) 
Directivity index(Dl) 12(± 2)1.2kHz-16kHz 
Power handing LF 400W(RMS)800W(PEAK) 
HF 160W(RMS)320W(PEAK) 

1200W(RMS)2400W(PEAK)(W-250) 
Sensitivity LF 99dB(1W/1M) 
HF 108dB(1W/1M) 
112dB(1W/1M)(W-250) 
Max S. P. L LF 125dB(PEAK/1M) 
HF 127dB(PEAK/1M) 
143dB(PEAK/1M)(W-250) 
LF section 2× 10"(260mm) neodymium woofer 
63mm(2.5in)coil 
Components 2× 15"(380mm) neodymium woofers 
100mm(4in)coil(W-250) 
Nominal impedance 16 ohm 
4 ohm(W-250) 
HF section 2× 1.75"neodymium compression driver 
With 44mm titanium diaphragm 
Nominal impedance 16 ohm 
Output section 2-channel 
Dispersion pattern 110° H× 9° V 
Finish Water-proof, wear-resistant textured black paint 
Array design Arrays of less than 3× W-210 will 
Provide poor dispersion control and 
Are neither recommended nor supported 
Speaker cables LF 1( )1(-) HF 2( )2(-) 
1( )1(-) (W-250) 

Rigging system Please refer to the W-210 user 
Manual before any operation 
Input connectors 2× NL4MP speakon 
Recommend crossover LF 45Hz-1200Hz 
HF 1200Hz-20kHz 
35Hz-120Hz(W-250) 
Dimensions 925× 316× 600mm(W× H× D) 
925× 520× 720mm(W× H× D)(W-250) 
Package dimensions 1025× 400× 750mm/0.31cbm 
1025× 605× 840mm/0.52cbm(W-250) 
Enclosure Birch plywood 
Net weight 39kg (W-210)/ 71kg (W-250) 
Gross weight 42kg (W-210)/ 75kg (W-250)