Contact Platform Support
Help Center
Related Products
-
Line Array Speaker Sound System Speaker BoxNegotiableMOQ: 2 Pieces -
Professional Active Line Array SpeakerNegotiableMOQ: 1 Piece
-
10''professional Line Array Speaker W-210A&W-250ANegotiableMOQ: 2 Pieces
-
CVR 12 Inch Professional Line Array Speaker W6NegotiableMOQ: 2 Pieces
-
12''Professional Line Array Speaker Outdoor Appliance(CE,RoHS)NegotiableMOQ: 2 Pieces
DESCRIPTION and APPLICATION
The W-8 is a line array system which is made of two 12" neodymium woofers, four 6.5" midrange speaker units, two 3” titanium neodymium compression drivers and high-performance low-distortion compression driver with innovative horn design of waves phase philosophy. It is a zero interfere line array with multi-speaker combined to produce accurate directivity and maximum dynamic impact. Its midrange speaker units are beset in treble horn board and two waves guide plates are set in between to eliminate its interfere.Each enclosure is equipped with rigging system, allowing flown array to be constructed rapidly and safely. W-8 is a 3-way, full range system and may be used without subwoofers for many applications. Also it may be complemented by ground stacked subwoofer CVR S-218 , which brings superb line array performance to large stadiums, big outdoor concerts, commercial events, etc.
| Model |
W-8 |
| Type | Line array system |
| Frequency Response |
45Hz-20KHz±3dB |
| Directivity index(DI) | 12(±2)1.2KHz-16KHz |
| Power handling | LF 1200W(RMS)2400W(PEAK) |
| MF 600W(RMS)1200W(PEAK) | |
| HF 200W(RMS)400W(PEAK) | |
| Sensitivity | LF 101dB(1W/1M) |
| MF 104dB(1W/1M) | |
| HF 111dB(1W/1M) | |
| Max S.P.L | LF 132dB(PEAK/1M) |
| MF 132dB(PEAK/1M) | |
| HF 134dB(PEAK/1M) | |
| LF section | 2×12" (310mm)neodymium woofer |
| 75mm(3in) coil | |
| Nominal impedance | 16 ohm |
| MF section | 4×6.5" (170mm)neodymium MF |
| 50mm(2in)coil | |
| Nominal impedance | 16 ohm |
| HF section | 2×3"neodymium compression driver |
| with 75mm titanium diaphragm | |
| Nominal impedance | 16 ohm |
| Output section | 3-channel |
| Dispersion pattern | 110°H×7.5°V |
| Finish | Water-proof,wear-resistant textured black paint |
| Array design | Arrays of less than 3×W-8 will |
| provide poor dispersion control and | |
| are neither recommended nor supported | |
| Speaker cables | LF 1(+)1(-) MF 2(+)2(-) HF 3(+)3(-) |
| Rigging system | Please refer to the CV-8 user |
| manual before any operation | |
| Input connectors | 2×Neutrik NL8 |
| Recommend crossover | LF 45Hz-400Hz |
| MF 400Hz-1200Hz | |
| HF 1200Hz-20KHz | |
| Dimensions | 1100×405×595mm(W×H×D) |
| Package dimensions | 1170×475×665mm/0.37cbm |
| Enclosure | Plywood |
| Net weight | 64kg |
| Gross weight | 69kg |
Send Inquiry to This Supplier
You May Also Like
-
High Accuracy NTC 10K 3950 Underfloor Heating Temperature Sensor TPE Injection Molded ProbeUS$ 0.7 - 1MOQ: 1000 Pieces
-
Professional Wireless DJ Audio Mixer - 6-Channel BT Compatible DJ ControlNegotiableMOQ: 1
-
E-200 20-20kHz Output 400W Professional Power Amplifier caUS$ 126 - 326MOQ: 1 Piece
-
New Design Monitor Speaker StandUS$ 7 - 8MOQ: 200 Pieces
-
Led ScreenNegotiableMOQ: 1 Piece
-
WIN LINUX / XP Touch Screen Information Kiosk For Ticket BookingNegotiableMOQ: 1 Piece
-
Custom 14 Layer FR-1, FR - 4 High TG Chemical Gold PCB Printed Circuit Board FabricationNegotiableMOQ: 1 Piece
-
0-200M Sealed Diffused Silicon 24 VDC Anti-leakage Level Liquid Pressure TransmitterNegotiableMOQ: 1 Piece
-
Guitar Amplifier (TNT118)NegotiableMOQ: 10 Pieces
-
Q18S LINE ARRAY LOUDSPEAKENegotiableMOQ: 1 Piece
