Professional Indoor and Outdoor Line Array Speaker

This configuration produces a continuous 
Coherent wavefront from the array, projecting extended-range 
High-resolution sound over its full coverage area 

DESCRIPTION and APPLICATION 
W-312A is a line array system which is made of one 12" neodymium housed in bandpass box to deliver ultra powerful bass driver, two 6.5"neodymium midrange speaker units of well-designed of waves phase horn loading technique, two 3" titanium neodymium compression drivers and high-performance low-distortion compression driver with innovative horn design of waves phase philosophy. It is a zero interfere line array with multi- speaker combined to produce accurate directivity and maximum dynamic impact. Each enclosure is equipped with rigging system, allowing flown array to be constructed rapidly and safely. W-312A is a compact line array enclosure designed to bring superb line array performance to large stadiums, big outdoor concerts and commercial events. It meets the need for a high power, high bass impact system that is versatile and scalable for a very wide range of applications in the live sound, corporate and fixed installations. W-312A may be used without subwoofers in many applications. It may also be complemented by ground stacked subwoofers CVR S-218/CV-218B. 

Model W-312A 
Type Line array system 
Frequency Response 45Hz-20kHz± 3dB 
Directivity index(Dl) 12(± 2)1.2kHz-16kHz 
Power handing LF 500W(RMS)1000W(PEAK) 
MF 300W(RMS)600W(PEAK) 

HF 200W(RMS)400W(PEAK) 
Sensitivity LF 104dB(1W@1M) 
MF 107dB(1W@1M) 
HF 111dB(1W@1M) 
Max@S. P. L LF 131dB(PEAK/1M) 
MF 132dB(PEAK/1M) 
HF 134dB(PEAK/1M) 
LF section 1× 12" (310mm)neodymium woofer 
75mm(3in)coil 
Nominal impedance 8 ohm 
MF section 2× 6.5"(170mm)neodymium MF 
50mm(2in)coil 
Nominal impedance 16 ohm 
HF section 2× 3"neodymium compression driver 
With 72mm titanium diaphragm 
Nominal impedance 16 ohm 
Output section 3-channel 
Dispersion pattern 110° H× 7° V 
Finish Water-proof, wear-resistant textured black paint 
Array design Arrays of less than 3× W-312A will 
Provide poor dispersion control and 
Are neither recommended nor supported 
Speaker cables LF 1(+)1(-) MF 2(+)2(-) HF 3(+)3(-) 
Rigging system Please refer to the W-312A user 
Manual before any operation 
Input connectors 2× Neutrik Nl8 
Recommend crossover LF 45Hz-400Hz 
MF 400Hz-1800Hz 
HF 1800Hz-20kHz 
Dimensions 1116× 395× 530mm(W× H× D) 
Package dimensions 1190× 470× 600mm/0.34cbm 
Enclosure Birch plywood 
Net weight 62kg 
Gross weight 66kg