Contact Platform Support
Help CenterGlazed Tile Roll Forming Machine
Related Products
Detailed Product Description
Weight:about 5tons.
forming speed: 15m/min
Rolling speed: 5-8m/min
Roll station: 13 steps.
Raw Materials: 1250mm.
Thickness of Material: 0.3-0.8mm.
Roller’s material: 45# high quality steel with surface coated with hard chrome 0.05mm.
Shaft material: 45# high-quality steel.
Shaft diameter: φ75mm.
Thickness of Siding Plate: 18mm.
Ladder Step: hydraulic control, after molding then cut ladder-shape outage.
Cutting method: hydraulic control, after molding then cut it outage.
Cutting Material:Cr12Mov, hardening HRC58-62
Chain wheel: track distance 25.4; number of wheel teeth:18
Stander: welding by 350*175H steeSquare box: material Q235-A wallboard-type square box
Main engine power: 5.5KW
Working pressure of hydraulic system:16MP
Motor power of hydraulic system: 4KW
Electric controlling system: PLC system.
Cutting deviation:10M±2mm
The machine size(L*W*H): 8500mm*1500mm*1300mm
1. The structure is simple, the outlook is artisticbecause the complete machine uses the section structure, after welding whole processing, therefore structure succinct reasonable, saves carries ability steadily, the revolution is reliable.
2. After the equipment roller wheel uses the high quality No. 45 forging steel precise manufacture, after coating the hard chromium on the surface, achieved the roller skin hardness is high, smooth, plate formation surface non-damage effect.
3. The stone roller is No. 45 steel after the quenching and retempering treatment, enhances the bearing the intensity, synthesis mechanical properties and so on degree of hardness
4. All of main primary device in electricity control system are imported from Mitsubishi Japan.
5. Uses the completely automatic cut-length-off, the fixed-length localization is precise, shape of strip from beginning to end is artistic neat.
6. Low noisy, high efficiency
7.Installation and Training Service Provided
8.CE Approved.
9.14-month warranty.
Send Inquiry to This Supplier
You May Also Like
-
Original SDLG 28350001691 Wear Part for Wheel Loader Spare Parts in Stock.US$ 6MOQ: 1 Unit -
In Stock MTU Spare Parts 5275305060_S0001 HOUSINGNegotiableMOQ: 1 Bag
-
Gear S4120002513 for SDLG Wheel Loader Genuine OEMNegotiableMOQ: 1 Piece
-
Engineering & Construction Machinery PartsNegotiableMOQ: 2500 Sets
-
Chromium Carbide Overlay Wear Plate Excavator Crusher Bucket LinerUS$ 399.69 - 399.69MOQ: 1 Square Meter
-
Excavator Piston Pump PC05-6 PC20 PC30 PC200-6 PC200-7 PC220 PC240 PC400 PC450 High Pressure Hydraulic Pump for KomatsuNegotiableMOQ: 1 Combo
-
518-5137 Stick Cylinder Seal Kit for CAT 330D Excavator YNF12211 Hydraulic Cylinder Repair Kit Stick Ram SealsUS$ 45MOQ: 1 Set
-
Durable Model 1460A053 Fuel Injection Pump Mitsubishi High-pressure Fuel Pump 294000-1370US$ 370 - 410MOQ: 1 Unit
-
MS01 1200mm Wide Excavator Attachment Mud MucketUS$ 240 - 280MOQ: 1 Piece
-
Connector Sealing up Pipe Stop Water Hexagon Threaded Protection Hard PlugsNegotiableMOQ: 100 Pieces
