Automatic Hole Punching Machine

Feature:
1.The machine is used for punching holes on IC card.
2.Adopting the touch screen, and operated by friendly interface. 
3. There are two different punching sizes to the same type chip. Each mold equipped with double cylinder punching pins which can be switched easily through the touch screen to realize the different punching sizes.
4. Servo motor drive the imported ball-screw finish positioning and feeding, the parameter of each punching point is adjustable,with high precision.The whole process is simply and quickly.
5. The feeding speed of the INLAY sheet and the hole position can be changed through modifying the parameter of the servo system on the touch screen
6. The feeding and punching methods include three-molds, four-molds and five-molds, which can be selected flexibly.

Machine Spec:

1.Dimension:L1650mm*W700*H1500
2.Weight: About 300kg
3.Power supply: AC220V 50HZ 
4.Power: 0.6KW
5.Compress Air: 6 kg/cm2
6.Air Consumption:20L/min
7.Control Method: Servo located + PLC 
8.Material Specification:0.2~0.4mm PVC,PET...
9.Operator:1 person

10.Output:About 450pcs/h