Silicone Adhesive Sealant Manufacturer for Adhesive Electronic Component
Non-sag, paste consistency
UL94 V-0
RoHs Compliance: Yes
Applications:
Sealing lids and housings
General sealing and component protection
Processing
All surfaces must be clean and dry. Degrease and wash off any contaminants that could impair adhesion. Suitable solvents include isopropyl alcohol, acetone or methyl ethyl ketone. Good unprimed adhesion may be obtained on a variety of substrates, including enameled and painted steel, aluminum, ceramics, glass and certain plastics. Substrates to which good adhesion is normally not obtained include PTFE, PE, PP and related materials. Apply a bead of BN-RT200 H Adhesive/ Sealant to one of the prepared surface, and then quickly cover with the substrate to be bonded. Very deep sections, will take longer to cure completely.
Cure time
After skin formation, cure continues inward from the surface. Cure time is extended at lower humidity levels. Before handling and packaging bonded components, users are advised to wait a sufficiently long time to ensure that the integrity of the adhesive seal is not affected. This will depend on many factors and should be determined by the user for each specific application.
Packaging
100g/blister, 300ml cartridge.
Usable life and storage
BN-RT200 H has a shelf life of 12 months from the date of manufacture when stored at or below 30℃ in the original un opened containers.
Send Inquiry to This Supplier
You May Also Like
-
85g Loctiter 587 596 598 Plane Sealant Glue Engine Plane Sealant Silicone Rubber SI 5910 AdhesiveNegotiableMOQ: 1
-
Manufacturer of Silicone SealantsUS$ 0.9 - 1MOQ: 12000 Pieces
-
Coloured Silicone Sealant Adhesive Silicone StripsUS$ 1 - 5MOQ: 200 Kilograms
-
Electronic Auxiliary Adhesive Double-sided TapeNegotiableMOQ: 2000 Pieces
-
PCB Electronic Potting Silicone Module Silicone SealantNegotiableMOQ: 1000 Kilograms
-
Weather Proof Factory Silicone Sealant as AdhesiveUS$ 0.7 - 2MOQ: 1728 Pieces
-
UV Cured Silicone Coated CPP/PE/PET Release Film for Adhesive Tape ManufacturingNegotiableMOQ: 100 Kilograms
-
Raw Material TPU for Electronic Appliance Coating AdhesiveUS$ 2.22MOQ: 1 Kilogram
-
55 Gallon PUR Hot Melt Adhesive Machine High Capacity Hot Melt Adhesive Machine Electronic ProductsCNY 28000 - 38000MOQ: 1 Piece
-
Tile Adhesive Bagging Machine For Valve Bags ManufacturerUS$ 1 - 35000MOQ: 1 Set