MSDS/ROHS Two-component Waterproof Silicone Potting Adhesive for LED Electronic Components
This potting is a two-component silicone sealing material,which can be cured at room temperature.The ethanol molecules are released during the curing process,and it does not produce corrosion to Poly-carbonate PP, ABS, PVC, copper and so on.It has a good adhesion for most of the electronic accessories (PP, PE excluded).
Performance | Reference standard | TS3366 | |
Before curing
| Appearance | Visual | black(A)/(B)black fluid |
Viscosity of part A (cps,25℃) | GB/T 2794-1995 | 1500-1800 | |
Viscosity of part B (cps,25℃) | GB/T 2794-1995 | 5-10 | |
Operation | Mix ratio | Measured by system | A :B = 10 :1 |
Density(g/cm3) | GB/T 533-2008 | 1.122 | |
Viscosity (cps) | GB/T 2794-1995 | 1000-1200 | |
Operable time (min,25℃) | Measured in the environment | 15-25 | |
Tack-free time (min,25℃) | GB/T 13477.5-2002 | 30-45 | |
Curing time (h,25℃) | Measured in the environment | 24 | |
After curing | Hardness(shore A) | GB/T 531.1-2008 | 10~15 |
Thermal Conductivity [ W(m·K)] | ASTM D5470-06 | 0.3 | |
Break voltage(kV/mm) | GB/T 1695-2005 | ≥20 | |
Dielectric constant(1.2MHz) | GB/T 1693-2007 | 2.5 | |
Volume resistivity (Ω·cm) | GB/T 1692-2008 | 5×1014 | |
TEMP(℃) | Measured in the environment | -50~200 | |
Elongation(%) | GB/T 528-2009 | 200 | |
Tensile strength(MPa) | GB/T 528-2009 | 0.4 | |
Apply to potting protection of both indoor and outdoor LED full color display and electronic components module potting.
Advantages
1.Low viscosity, good leveling, light weight.
2.There is no corrosion to LED product since the product belongs to the dealcoholization reaction.
3.Excellent heat resistance, moisture resistance and cold resistance,it can extend the life of electronic accessories after applying.
4.It is removable,the sealed components can be replaced and without leaving traces when re-irrigate and repair.
5.This product does not need other primers,it has excellent adhesion to PC (Polycarbonate), epoxy and other materials ,the waterproof rating is up to IP65.
6.Fully cured material has a good insulation,damp-proof,mildew proof chemical-resistance,UV resistance and aging-resistance.besides,it can fit extreme temperature that can work stable for a long time under -50-200℃.
7.Fully in line with the ROHS directive requirements in EU.
Send Inquiry to This Supplier
You May Also Like
-
Good Strength Two-component Silicone Potting for LED Wall Washer LightUS$ 4.5 - 4.7MOQ: 200 Kilograms
-
Good Strength Two-component Silicone Potting for LED Wall Washer LightUS$ 4.5 - 4.7MOQ: 200 Kilograms
-
High Potting Production Efficiency Good Strength Two-component Silicone Potting for LED Wall Washer LightUS$ 4.2 - 4.4MOQ: 200 Kilograms
-
Two-component Electronic Thermal Silicone for Potting and Protection of Electronic ProductsUS$ 2.3 - 2.5MOQ: 200 Kilograms
-
Two-component Gray UV Resistance Electronic Thermal Silicone for Potting and Protection of Electronic ProductsUS$ 2.4 - 2.6MOQ: 200 Kilograms
-
Two Components ROHS/MSDS Electronic Potting Silicone Compounds 5kgs/barrelUS$ 3.0 - 3.2MOQ: 200 Kilograms
-
Heat Conductive Silikon Sealant Two Components Thermal Conductive Silicone RubberUS$ 3.7 - 3.9MOQ: 200 Kilograms
-
Hot Sale Silicone Rubber Two Component Potting Sealent Used in LED SpotlightUS$ 3.7 - 3.9MOQ: 200 Kilograms
-
Tensan High Quality Waterproof Addition Type Liquid Silicone Rubber for Electronic Appliances 10kg/barrelUS$ 2.3 - 2.5MOQ: 200 Kilograms
-
Electronic Potting Compound Silicone for Power Supplies and LED 10kg/barrelUS$ 4.8 - 5.0MOQ: 200 Kilograms