300ml no Rot no Toxic Good Adhesion Electrical and Electronic Silicone for Electrical Components
This product is a kind of one-component silicone packaged by aluminum shell, plastic pipe.It can cross-link with the moisture from the air at room temperature and vulcanize into a high-performance elastomer. It is a good adhesive and sealant for metal and non-metal materials. The silicone can be bonded with metal, glass, ceramics and many materials, and it plays a role in bonding and sealing a variety of electronic components.It is no pollution to environment around.The colloid after curing, fully play the excellent electrical properties of organic silicon material.In a wide temperature range (-60—200 ℃), with anti-tensile, anti-vibration and anti-shock capacity; and has excellent weather resistance, heat resistance, cold resistance, hydrophobic.
Before curing:
Order |
Item |
Index |
Note |
1 |
Appearance |
White semi-flow |
Visual |
2 |
Tack free time(min) |
5~15 |
Finger touch |
3 |
Complete cure time 25℃(H) |
24 |
|
4 |
property(g/cm3) |
1.40±0.02 |
After curing:
Order |
Item |
Index |
Note |
1 |
Hardness(Shore A)≥ |
60±5 |
|
2 |
Tensile strength(Mpa)≥ |
1.0 |
|
3 |
Breaking elongation (%)≥ |
52 |
|
4 |
Volume resistivity (Ω.cm3) ≥ |
1.5×1014 |
|
5 |
Dielectric strength(KV/mm)≥ |
10 |
|
6 |
Shear strength(N/cm2) |
2.92X10-2 |
|
7 |
Temperature range(℃) |
-60~200 |
|
8 |
Flame resistance |
V-0 |
Note:All of the data above was obtained in the 25 ℃, 55% RH of the silicone for 7 days after curing.
Main advantages
●One-component, easy to use;
●White semi-flow, high extrusion rate, suitable for the bond and fix of dense components
●Neutral cross-linked silicone, will not corrode the electronic components and copper foil
●Flame retardant performance, to V-0;
●Excellent adhesion, can form a strong bond with most of the material after curing
●Elastic rubber: resistance to mechanical vibration and temperature shock;
●Superior electrical performance: in a variety of harsh conditions to maintain excellent anti-wear property;
●Excellent temperature performance, curing at low temperature -60 ℃ and still does not become brittle, hardening or cracking, at high temperature of +220 ℃,will not soften and degrade.
Send Inquiry to This Supplier
You May Also Like
-
2600ml Good Quality One-component Silicone Adhesion Electrical and Electronic Silicone for Electrical Components/LEDUS$ 14.7 - 14.9MOQ: 100 Pieces
-
100ml Good Waterproof Adhesion Electrical and Electronic Silicone for Transformer and Power SuplyUS$ 0.98 - 1MOQ: 500 Pieces
-
300ml Good Adhesive and Sealant for Metal and Non-metal MaterialsUS$ 2.25 - 2.27MOQ: 200 Pieces
-
2600ml no Pollution One-component Silicone Adhesion Electrical and Electronic Silicone for Electrical Components/LEDUS$ 14.7 - 14.9MOQ: 100 Pieces
-
High Quality Heat Resistant Silicone Adhesive for Solar Module for LED Lighting /100mlUS$ 1.1 - 1.3MOQ: 500 Pieces
-
Small Tube Neutral Silicone Sealant for ABS Plastics /300mlUS$ 2.4 - 2.6MOQ: 500 Pieces
-
Environmental Waterproof Siliconesealant Red/black/grey/black Rtv Silicone Sealant/adhesive /2600mlUS$ 14.7 - 14.9MOQ: 60 Pieces
-
Best Quality Sealants and Adhesives With Neutral Curing /100mlUS$ 1.1 - 1.3MOQ: 500 Pieces
-
General Use Thermally Conductive Transparent Epoxy Adhesive Glue /300mlUS$ 2.4 - 2.6MOQ: 500 Pieces
-
2017 General Purpose Silicone Sealant Fireproof Silicone Sealant/2600mlUS$ 14.7 - 14.9MOQ: 60 Pieces