Qingyi heat transfer sticker for EVA slipper with high quality

1.Introduction:anti-friction low& flat heat transfer sticker use AA material made in China,economical,made for EVA material, it is easy to make; common elasticity; it can use for environmental material, fresh color.

2.Main specification:

(1)Material:301 AA water-base paste,HMA-200A oil-base polymer glue.

(2)The material is water-base and non-smelling, flat and smooth,nice color , common weather resistance ,add a protect layer,so it is anti-sublimation.

(3)Apply to EVA slipper and anti-friction bags.

3. technology information:

(1)Main material:AA made in China,PET release film.

(2)The thickness of ink layer: 100um-120um,including the film:150um-200um,4 color offset printing ink + water-base paste;

(3)Peeling method and effect:hot peeling ,cold peeling,hot and cold peeling;flat light, matting ,shiny light.

(4)Heat transfer requirement:temperature 130-150 degrees,time 6-12s/time,pressure:above above 0.24kgf/cm^2.

(5)Wash requirement: home launder - ometer tested, 40degrees, within 10 times,30 min/time.reach the international anti-friction more than 100times.

(6)Size:39*54cm,48*64cm,or single package.

(7)Applied fabric: EVA slipper and edge grinding bags.

(8)Not provide any environmental certifications.

/expiry date/package:

(1)Placed in cold dry place,ban crashing with sharp things.if you can't use up while open it,seal it otherwise it will go bad in rainy day or high temperature.

(2)Standard package:100peices/bag;500peices/case;or divided into single and package each one.(it is depended on customer)

(3)The expiry date is within 12 months.

5.Attention:

(1)Try the simple then  massive produce  .

(2)Seal the rest stickers,you should dry the products,don't let them in rainy day.

(3)This information is true and right,but it will change if customer offer the fabric/color/picture which is out of our control.we will take measure according to practice.