Contact Platform Support
Help CenterGBB-F Heat Seal Tester For Plastic Packing Industry
Related Products
-
Gas Chromatograph GC-9801US$ 7,886 - 7,910MOQ: 1 Piece -
Heat Seal Tester For Packing GBB-FUS$ 4,634 - 4,650MOQ: 1 Piece
-
Gas Transmission Rate Tester N500US$ 12,943 - 12,956MOQ: 1 Piece
-
Moisture Vapor Transmission Tester (MVTR Tester)US$ 15,447 - 15,460MOQ: 1 Piece
-
300x350mm Leak Detector PackageUS$ 1,393 - 1,460MOQ: 1 Set
GBB-F Heat Seal Tester For Plastic Film
To test the temperature, pressure, time and strength for heat sealing of various plastic films, composite film, aluminum foil and so on, widely used in industries of plastic films, food, pharmaceuticals, inspection agency, research institute and so on.
Reach the standards:
QB/T 2358, ASTM F 2029, YBB 00122003
Technical parameters:
Heat sealing temperature |
Room temperature ~300℃ |
Temperature accuracy |
+/- 0.1℃ |
Heat sealing time |
0.01s ~ 99.99h |
Heat sealing pressure |
0.05~0.8MPa |
Heat sealing area |
45*10mm*5 points, smooth, (lower blade with silicon pad) can customize size |
Heating mode |
Double heating, Automatic or manual, air cylinder built-in |
Instrument size |
L700*B400*H540mm |
Power supply |
220V, 50 Hz |
To test the temperature, pressure, time and strength for heat sealing of various plastic films, composite film, aluminum foil and so on. Five points heat sealing, every point works independently. High efficiency, different temperature, small influence, also can be single or double testing.
Configuration:
Main machine, foot switch, power cable
(Note: air source is provided by user. )
Base application |
Film material-- smooth surface |
Suitable for heat sealing test on all kinds of plastic film, plastic laminated film, paper-plastic composite film, co-extrusion film, aluminum plating film, aluminum foil, aluminum foil composite film. Smooth surface, sealing width can be designed by user’s request. |
Film material--pattern surface |
Suitable for heat sealing test on all kinds of plastic film, plastic laminated film, paper-plastic composite film, co-extrusion film, aluminum plating film, aluminum foil, aluminum foil composite film. Heat sealing area can be designed by user’s request. |
|
Expanding application |
Jelly Bowl Cover (Note: Need to customize accessories.) |
|
Plastic tube | ||
|
|
|
Double Groove Hegman Fineness Gauge |
Use For Paint Four Side Wet Film Applicator | Stainless Steel 4 Side Wet Film Applicator Effective Length 160mm |
|
|
|
| Cube Film Applicator(38um 76um) | Hand Ink Proofer For Flexo Ink Tester |
Bending Testing Cylindrical Shaft Bending Device |
|
|
|
| Cross Cut Adhesion Tester For Paint | 50ml Stainless Steel Density Cup | GB/T 9264 Standard Sagging Tester For Pain |
More product welcome to Visit our Website
→ RongtaiPacking
Send Inquiry to This Supplier
You May Also Like
-
Endress+Hauser E+H Compact Conductivity Device Smartec CLD18-BGGENegotiableMOQ: 1 Piece
-
BDV Tester Portable Transformer Oil Bdv Tester Insulation Oil Dielectric Strength Meter 100kVUS$ 1500 - 3500MOQ: 1 Set
-
Universal Testing MachineNegotiableMOQ: 2500 Pieces
-
Computer Control Hydraulic Universal Testing MachineNegotiableMOQ: 1 Set
-
Hydraulic Plastic Flange Connections Cover Plugs SHF SeriesUS$ 0.22 - 0.28MOQ: 2500 Pieces
-
Gates 550C 550U U550 U-550 U508 U-508 Japan Unitta U-550 Belt Tension Meter New U-508 Belt Tension Meter Upgraded Version U550US$ 1 - 900MOQ: 1 Piece
-
Vertical Rod Type Floor-type Electrostatic Discharge Tester / Electrostatic Discharge Device for Human BodyUS$ 20 - 93MOQ: 1 Piece
-
Analytical Balanace.scale ,weichengya Laboratory SupplierUS$ 10 - 35MOQ: 10 Sets
-
Smart MD-3051 Online Density Meter With 4-20mA OutputUS$ 2,380 - 2,500MOQ: 1 Unit
-
5W-300W Sun Simulator Watt Testing 30% Off / Xenon Lamp Sun Simulator Free Sent / Sun Simulator TestingUS$ 7,500 - 10,000MOQ: 1 Set
