Cotton Comber Noil 100%

Cotton Comber Noil

List of machinery used at GSM:

• 100% cotton yarn (count range from 36’s to 60’s)
o Carded weaving / hosiery
o Combed weaving / hosiery

• Cotton waste (spinning waste)
o Comber noil
o Flats
o Likkering (LD)
o Blow room droppings
o Hard waste

• MCU-5 raw cotton bales (staple length 28mm to 32mm+)

MCU-5 28MM RAW COTTON BALES, STAPLE LENGTH IS 28+MM,MIC IS 3.5 TO 4.2,STRENGTH IN GPT 29 TO 30,TRASH 2 TO 3%,MOISTURE IS BELOW 9%

Guntur spinning mills pvt limited was established in the year 2007 at Guntur, Andhra Pradesh, India.
This unit presently running with 14400 spindle capacity and planning to expand with the same 14400 spindles in the same premises.

We were producing 100% cotton yarn from 38's to 50's count i.e., carded yarn, combed yarn and hosiery yarn. We were producing the best quality 100% cotton yarn by using MCU 5 raw cotton bales.

Guntur spinning mills pvt ltd. was founded by members who were having good experience in raw cotton ginning process since 1985's and having own TMC (modernized ginning) units also.

The previous experience of our directors in cotton is very useful to produce good quality cotton yarn.
Guntur spinning mills pvt ltd., was equipped with total modernized machinery like schloforst auto coner, LR ring frames and using uster technology for testing the yarn.

Guntur is the location where good quality raw cotton is available and also it was the main market in the Asia to yield MCU -5 raw cotton with huge quantity. In Guntur in an around 450no's cotton ginning mills are located.

We were the manufacturer and exporters of 100% cotton yarn, cotton waste and MCU-5 raw cotton bales.