Contact Platform Support
Help CenterAdjustable Red Laser Sight and Red Laser Scope or Laser Aimer
Related Products
-
Tactical Green Laser Sight and Green Laser Scope or Laser AimerNegotiableMOQ: 500 Sets -
New Military Standard Tactical Invisible IR Laser Scope and Red Laser Sight ComboUS$ 170 - 220MOQ: 100 Sets
-
New Military Standard Invisible Infrared Laser Scope and Green Laser Sight ComboNegotiableMOQ: 100 Sets
-
New Military Standard Dual Red Laser Scope and Green Laser Sight ComboNegotiableMOQ: 100 Sets
-
Tactical Green Laser Sight With New Push Button End Cap SwitchNegotiableMOQ: 100 Pieces
Specifications
Full set medium size adjustable red gun laser sight or red laser scope and laser aimer, with 650nm wavelength.GENERAL DESCRIPTION
Model: ES-GJ-KD-9
Name: Adjustable Red Laser Sight Laser, Red Laser Aimer, Red Laser Scope and Red Laser Pointer
Wavelength: 635nm
Power Output: <5mW
Dot Size:0.7"Ø at 20 yards
Visible Range:50 yards in daylight and over 200 yards at night under
optimum conditions
Working Temperature: -10 ~ +40
Storge Temperature:-20 ~ +60
Size (laser only): 1" Ø x 4.35"L
Weight with Battery: 4.3 oz
Battery: One CR123 Lithium Battery
Battery Life:50 hours
Warranty: 2 Years Limited
Construction:Aircraft aluminum 6061-T6
Finish:Anodic oxidation/ black
Operation: Curly On/Off cord switch or straight on/off button
Rail Mount:Mounts to standard 7/8" Weaver base
ATTACHING THE CORRECT MOUNT TO THE DEVICE
Simply slide the appropriate rail onto your gun and tighten it into place utilizing the two rail attaching screws and the larger of the two supplied socket head wrenches. Note the weaver style rail utilizes a lock screw to prevent its slippage under recoil. This lock screw should be fit into the groove found on most weaver style mounts.
ACTIVATING THE LASER
A. Installing the battery
Your new laser is powered by one long-life lithium battery. To install the battery, Screw the back cover off the body off the laser sight, Next , insert the battery into the battery holder with the "+" side up, then screw the back cover.
B. Main on/off switch
With this switch, you may turn the laser on when tightened the back cover, and allows you to turn the unit on or off with pressure when not tightened the back cover.
C. Momentary pressure switch
This switch allows you to turn the unit on or off with pressure and the curly wire may be stretch. The pressure pad may be attached to a convenient location on your gun.
REPLACING THE BATTERY
The battery included with your laser target designator will provide long service. However, should the dot grow dim, the battery may need to be replaced. To do so, remove the battery and replace with the new battery.
....
Send Inquiry to This Supplier
You May Also Like
-
FDA Certify RS-0100 4mw Non-waterproof Red Laser Sight With Rail Mount and ON/OFF Switch or Pressure Pad for Rifles & PistolsUS$ 15 - 20MOQ: 100 Pieces
-
Laser BoreSighter Kit for 22 to 50 Caliber Rifles Handgun Red Dot Sighter Laser Bore SighUS$ 10.3 - 10.3MOQ: 100 Units
-
Universal 3 Digit Combo Gun Lock Fits Pistols Rifles Shotguns 450566US$ 2.17 - 3.25MOQ: 1000 Pieces
-
LaserExplore Waterproof Riflescope Mate Shooting Range Finder Riflescope Rangefinder Quality ChoiceUS$ 150.00 - 150.00MOQ: 1 Piece
-
Bathroom Plastic Chrome Shower Sliding Rail Shower Riser RailUS$ 2 - 5MOQ: 100 Pieces
-
Hot Sale Gun Accessories 25mm Ring Mount,Rlfle Scope for Tactical Flashlight/LaserUS$ 1.3 - 1.63MOQ: 10 Pieces
-
High Power Red Laser Gun Sight With LED FlashlightNegotiableMOQ: 5 Pieces
-
Front Clip Bicycle Motorcycle Flashlight Torch Holder MountUS$ 3 - 5MOQ: 1 Piece
-
225mm Tactical Rail Mount Rifle ScopeUS$ 7.84 - 15.68MOQ: 1 Piece
-
XAXWR85 Flex Head All in One Armorer WrenchUS$ 6.6 - 6.6MOQ: 100 Pieces
