automatic pressure control for water pump

1.1KW automatic pressure control for water pump with starting pressure 1.5bar or 2.2bar

1. SPECIFICATION 

    The automatic controller for water pump is an intelligent pump control device installed on the pipeline. It can start and stop the pump according to the varied data such as water resource condition and pipeline pressure it detected. It can completely replace the traditional system constructed by pressure tank, pressure switch, water shortage protection devices, check valve and four-way valves. The particular patented check valve device can prevent the possible surging in the system. Pressure gauge shows system pressure variation and its inlet and outlet are assembled in 60° Right angle. The starting flow is 80-160L/h and can satisfy any need for home and garden sprinkling irrigation application.

2. TECHNICAL DATA:

• starting pressure:1.5bar or 2.2bar
• max rated current:10A
• max allowable pressure:10bar
• rated voltage:110V-120V or 220V-240V
• frequency:50/60hz
• max ambient temperature:60°C
• protection degree:IP65

3.DESCRIPTIONS:

• electric switch used in water systems
• it starts the electric pump automatically after a pressure decrease(taps opening)and stops it when the fuild flow interrupts at the maximum pressure level of the electric pump(taps closed)
• joint screw:G1" male
• completely replaced traditional pump control system composed of pressure switch,pressure tank and check valve.etc
• stop the water pump in the case of water shortage.
• with plug and socket,pump connection be more easily.
• customized setting

4.OPTIONALS

• Color
• G1" plastic pipe joint for a quick connection to water pump
• power cable length can choose according to customers' needs.

5.PACKING SIZE

• 12PCS/CTN
• 57.5*54*25CM
• N.W:16.5KGS
• G.W:19.18KGS