Sectional Screw Flight

Specifications

1.Good smooth finish
2.Easy to installation
3.After cold rolling, the spirals will be hardened and wear-resistance

Material: Carbon steel, abrasion-resistant steel and stainless steel.

 

Manufacturing method: welding

 

faetures:

1)The sectional screw flight presents a single pitch constrution, the outer diameter, inner diameter and the picth can accurately meet the size required once forming is completed.

2)Different types and forms are available like equal diameter / variational diameter, equal pitch / variational pitch and inner hole with supporting lugs,  etc..

3)Compared with continuous rolled forming technology, it has the advantages of higher yield, higher precision of forming, higher eligible rate, small quantity order requirement and various supply demand can be met.

4)It particularly applies to the production of big thickness, big size flight made by wearable steel or stainless steel.

 

Specification Chart:

Pitch(mm)	Outer Diameter(mm)	Inner Diameter(mm)	Blade Titchness(mm)
200	200-600	≥40	Carbon steel ≤25   Abrasion-resistant steel≤25   Stainless steel ≤20
250	250-600	≥40
300	300-600	≥50
350	350-600	≥60
400	400-600	≥70
450	450-600	≥90
500	500-1000	≥100
600	600-1200	≥110
700	700-1200	≥120
800	800-1200	≥130
900	900-1200	≥140

Note:Non-standard flights can be customfabricated to your specifications. Please send print or sample for fabrication of screw flight.

Now we have two types of flights, one is the Continuous Cold Rolled Screw Flight (inner edge is thick and the out edge is thin); the other type is Sectional Screw Flight (same thickness in both inner edge and outer edge). We're ISO9001 certified enterprise.