Contact Platform Support
Help CenterLarge Single Barrel and Barrel for Extruder Machines, Several Part of Cylinder
Related Products
-
Single Barrel, Screw and Barrel for Extruder, Single Screw and BarrelUS$ 350 - 10,000MOQ: 1 Set -
Extruder Screw Design for MachineUS$ 350 - 10,000MOQ: 1 Set
-
Screw and Barrel for Film Blowing Extruder Machine, Single Screw and BarrelUS$ 350 - 10,000MOQ: 1 Set
-
Single Screw and Barrel, Extruder Screw for Blowing FilmUS$ 300 - 5,000MOQ: 1 Set
-
High Quality Single Screw for Extruders With Good DesignUS$ 300 - 5,000MOQ: 1 Set
Extruder barrel for extru
der machine
Single screw and barrel
Extruder barrel,cylinder for extruder machine
the barrel, cylinder can be several parts and connect together to compelet one barrel.
Size:
Screw Diameter:Φ20-Φ500mm
Maximun screw length: 10000mm
Barrel inner bore diameter: Φ500mm
Depth of Nitration Layer: 0.5-0.8mm
Hardness of Nitration: 950-1020Hv
Fragility of Nitration: Less than grade 1
Surface Roughness: Ra 0.4 um
Streightness of Screw: 0.015mm
Surface Hardness of Nitrated Cr coating Layer: >=950Hv
The Thickness of Cr Coating Layer: .03-0.08mm
Hardness of Alloy Plating: HRC55-620
Depth of Alloys Layer: >2mm
Introduction: Used for producing PA6,PA6.6, EVOH, EAA, PC etc.
We can manufacture all types of screws and barrels according to clients' requirement.
Single screw and barrel for injection moulding machine(can according to customer demands for making)
| Our Forwarder | According to customers demands to choose the forwarder |
| Transport | By Sea; By Air(the cost will get agreement with customers) |
| Seaport | Ningbo or Shanghai |
Woodencases with our company marks
| Design Service | Screw and barrel Design According with Capacity and Raw Material |
| After Service | 24 Hours After-sales |
Zhoushan Huayu Machinery Manufacturing Plant
Add: No.69 Haifu Outer Pond, Yancang Street, Dinghai, Zhoushan,Zhejiang, China 316000
Tel: +86 (580) 8803-886 +86 (580) 8805-118 Fax: +86 (580) 8803-885
Mobile phone: +86 135 7563 8315
ZHOUSHAN HUAYU MACHINERY MANUFACTURING PLANT is one of the largest domestic manufacturing enterprise thatspecializes in researching, designing and manufacturing high precise bimetallic and nitrided screws and barrels, as well as screw assembly parts, barrel assembly parts, various oil cylinders and air cylinders. We provide products for manufacturers of plastic injection, extrusion, chemical fiber, cables and so on.
What is screw and barrel processing production?
Our Screw and Barrel processing production:
Order--Design(Customer Drawing)—Production Arrangement—Material Procurement —Hardening&Tempering—Drilling—Rough Turning—Rough Thread Rolling(Alloy Spray Welding if the customer need—Alignment—Fine Thread Rolling—Mixing—Alignment—High Frequency Treatment—Alignment —Polishing—Grinding—7 days Nitriding Treatment—Acid Picking—Polishing—Chrome Plating—O.D.Grinding —Packaging&Shipping
Send Inquiry to This Supplier
You May Also Like
-
Meltblown PP Non-Woven Fabric Making Machine for Face Mask N95 Medical MaskNegotiableMOQ: 1
-
PVC Monofilament Extruding Line(Used), Monofilament Machine, Monofilament EquipmentUS$ 8 - 10MOQ: 1 Piece
-
PVC Laminated Gypsum Board Production LineUS$ 100,000 - 200,000MOQ: 1 Set
-
With Iron Full Plastic Mask Nose Wire Making Machine for Face MaskUS$ 15,000 - 15,000MOQ: 1 Set
-
Factory Price Melt Blown Fabric Production Equipment and Extruder LineUS$ 120,000 - 130,000MOQ: 1 Set
-
Production Line Used for Granules Powder Material FeederUS$ 650 - 800MOQ: 1 Set
-
TZ Brand Plastic Filament Extruding MachineNegotiableMOQ: 1 Set
-
Air Bubble Roll Line Stage LightingUS$ 20,000 - 60,000MOQ: 1 Set
-
Food Grade Silicone ProductsNegotiableMOQ: 1 Piece
-
Semi-auto Finger Joint Shaper(hydraulic)NegotiableMOQ: 1 Piece
