Contact Platform Support
Help CenterEletronic Component : Bimetallic Jumping Disc Made in Anhui
Related Products
-
ISO Standard Fun School Toy SD04US$ 0.4 - 0.6MOQ: 1000 Units -
ISO 9001:2000 Certified Bimetal Thermostat Jumping Disc With High QualityUS$ 0.15 - 1.68MOQ: 5000 Pieces
-
ISO 9001:2000 Certified Bimetallic Thermostat Disc With High QualityUS$ 0.15 - 1.68MOQ: 5000 Pieces
-
ISO 9001:2000 Certified Bimetallic Thermostat Disc Made in WuhuNegotiableMOQ: 5000 Pieces
-
ISO Standard Jumping Discs for ToysNegotiableMOQ: 1000 Units
Eletronic Component : Bimetallic Jumping Disc
The jumping disc is made from a special piece of metal, called bi-metal that moves when heated with your thumb. When it is warmed to about body temperature, you can "click it" into its loaded position and then carefully place it on a hard surface. When it cools down to room temperature, it suddenly snaps back into the old position, and simultaneously jumps high up in the air. It jumps several hundred times its own height.
The jumping disc toy works on the same principle as a thermostat or a shunt-valve in your car. With such a thermostat or automatic valve, a special piece of metal, called bi-metal, moves when heat is applied or removed. Bi-metal is actually two pieces of thin metal fused together in the middle. When the temperature changes, the metals expand differently and bend into a curve in either direction.
For instance, when the temperature drops in your home the bi-metal in your thermostat cools down, moves a little, hits a contact and turns on a heater. This way the temperature stays the same. In a car, the metal disc made of bi-metal opens or closes the valve to the radiator, so the water stays about the same temperature to make the engine run well.
In the case of the jumping disc, the bi-metal stays in one position when at room temperature, and in another position when at body temperature. First you warm it to body temperature in your hand, and then you snap the disc between your fingers so it stays in this “new” position. Now you carefully, and quickly, slide it onto a hard surface, like a table. In a few seconds the disc cools off, suddenly snaps back into the regular position, and with a loud “click” flies high into the air!
Send Inquiry to This Supplier
You May Also Like
-
15kVA 3-Phase Power Voltage Stabilizer for CNC Equipment ±2% Output PrecisionUS$ 203MOQ: 1 Unit
-
Electronic CapacitorNegotiableMOQ: 2000 Pieces
-
6\"/8\" FramesNegotiableMOQ: 500 Pieces
-
Oven Capacitor CH85 2100VAC Capacitor for MicrowaveNegotiableMOQ: 1
-
20kA Surge Protective Device SPD (SP-D10)US$ 0.01 - 0.02MOQ: 1 Piece
-
IRFP450,100% New and Original. Top Sales!!!NegotiableMOQ: 100 Pieces
-
Miniature Capacitor 2.7v1f 6.3x9mm Super CapacitorUS$ 0.35 - 0.5MOQ: 100 Pieces
-
50V 10UF CapacitorUS$ 0.5 - 1MOQ: 200 Pieces
-
BNCHG Terminal Block Pin Connector for Over 12 Year ExperienceUS$ 0.35 - 0.4MOQ: 10000 Sets
-
Bimetal Thermal Switch 250V 5A-25ANegotiableMOQ: 1000 Pieces
