Digital Coating Thickness Gauge

Specifications

.1 Measuring Principle

The instrument adopts the magnetic and eddy current principle to measure in a non-destructive way
Magnetic way (type F probe)
measure the thickness of non-magnetic coatings on magnetic metallic base (e.g. zinc, aluminum, Cr. Copper, rubber, paint, coating on the base of steel, iron, alloy and hard magnetic steel etc.)
eddy current way (type N probe)
measure all electrically insulating coating layers,such as lacquer,Varnish, paint,anodizing coating on nonferrous metals,also on austenitic VA steel materials.

1.2 Standard Configuration

main frame 1

Substrate 1
Calibration foil 5
9V Battery 1
Probe F1/N1 1
Manual Instruction 1

1.3 Operation environmen

Temperature: 040
Humidity: 20%RH90%RH
Without strong magnetic field

10Matters Need For Attention
I. After purchasing product from our company, please fill carefully the Warranty Registration Card and stamp your office on it. Please send copy (I) and the copy of invoice to the User Service Dep. of our company, or you can ask the seller to send that on your behalf.(II) The copy (I) will be sent to (left at) the maintenance station of local branch for registration.For any area without maintenance station, please send copy (I) and (II) back to the User Service Dep. of our company.When the procedure are not complete, we can only maintain but offer no warranty service.
II. For any product from our company, since the day user purchases it, if it has any fault in term of quality (except for non-warranty parts), please contact the maintenance stations of local branches at different areas of our company for repairing, replacing or returning by using the Warranty Card (the copy kept by the user himself) or the copy of the invoice issued when purchasing the product.During the warranty period, if one has no way to show the warranty card or the copy of the invoice, we will count the warranty period based on the shipping date, and the period is one year.
III. If any product of our company has fault after the warranty period, the maintenance will be charged according to prescription of our company.
The special configuration beyond our established product will be charged according to concerned criteria.
V. Our company will not warranty any product which is damaged because the user has disassembled by himself, due to improper transportation and storage or incorrect operation not following the Operation Instructions, as well as for which one has altered the Warranty Card and one has no Purchasing Proo