Including main board,key card,dongle,line

Introduce
MPC6565 is designed for the open-loop motion control system for the laser machine only. It is upgraded from MPC6535. Based on DSP and FPGA technology, the advanced velocity look-ahead and trajectory blending algorithm ensure the velocity invariableness and transition smoothness between any two-trajectory segments during the high speed X-Y continuous trajectory motion. And therefore the perfect smoothness and precision of the machining can be easily achieved.

Applications
Over 10-year experience in CO2 (analog command) or RF (PWM command) tube compatible laser machine exclusively, open-loop motion control system:

Features
Both servo and stepper motor supported
Break-point resume
Pulse frequency up to 2MHz
Compatible for stepper motors or digital servo motors
RS232 ModBus Protocol
Data transferred by USB cable or USB flash drive
1-CH laser power on/off control output
1-CH laser PWM control output
Up to 2-CH independent power analog output
PWM preheat control
Uncapping protection
Flying-optics compensation

Laser Control Functionality

Motion Control

High precision interpolation, circular interpolation resolution under 0.5 pulse

For CO2 tube

Laser ON, TTL compatible
Laser power control: PWM, frequency or analog voltage (user select)

For RF tube

Laser ON, TTL compatible
Q pulse signal, programmable duty and frequency

Software Environment

Windows 2000/XP/VISTA/7/8/8.1/10 (32 and 64-bit) Windows
Bundled with application software, LaserCut5.3 or 6.0

Working Environment

Temperature: 0-60 Celsius degree
Humidity: 5-90%, non condensing

Power

24VDC, 2A

The Connection Pin Definition

A Typical Control System with MPC6565