Specifications
Rock and Masonry Saw1.Good and stable performance
2.Use safety and esay
RMS-350 Rock and Masonry Saw
Characteristics:
1.This rock and masonay saw has been specially developed to cut rock or core samples.
2.The machine is supplied complete with a special clamp to allow irregular specimens to be hele firmly in place during the cutting operation .
3.The machine can accept blades up to 350mm dia.
4.Supplied with base frame.water pump and cylinder clamp.
| Model | RMS-350 |
| Cutting depth | 100mm |
| Cutting length | 650mm |
| Blade speed | 2800 r.p.m |
| Cutting blade | dia.350mm |
| Power supply | 220V,50Hz,2200W |
| Timing accurancy | ≤0.05% |
| Overall dimensions | 1270x640x1100m |
| Weigth approx | 80kg |


Send Inquiry to This Supplier
You May Also Like
-
Geological HammerNegotiableMOQ: 10 Sets
-
CCM-150 Core Cut-off MachineNegotiableMOQ: 1 Set
-
AACT-1 Alkali Aggregate Testing ChamberNegotiableMOQ: 1 Set
-
SDI-1Rock Slake Durability AppratusNegotiableMOQ: 1 Set
-
DSA-30 Rock Direct Shear AppratusNegotiableMOQ: 1 Set
-
SGM-2 Specimen Grinding Mashine(Double-direction)NegotiableMOQ: 1 Set
-
Rock Joint Roughness Coefficient And Tilt Testing MachineNegotiableMOQ: 1 Set
-
Dial Gauge Type Point Load TesterNegotiableMOQ: 1 Set
-
Digital Dispay Rock Point Load Strength InstrumentNegotiableMOQ: 1 Set
-
SVA-1 Rock Sample Verification ApparatusNegotiableMOQ: 1 Set









