ACT-1Ignition Method Asphalt Content Tester Furnace

Ignition Method Asphalt Content  Tester Furnace

 BS DD250   ASTM D6307/98

General  terminological interpretation

1.Testmethod(ignition method):Put the hot asphalt mixtures into the chamber of the ACT-1asphalt content tester.Make it fully burned under the required combustion temperature.Calculate the asphalt content according to the"sample weight" and"loss weight".

2.Asphalt content(%):Asphalt weight÷Asphalt mixture weight×100%

3.Asphalt-aggregate ratio(%):Asphalt weight÷Aggregate weight in mixture×100%

Main structure
1.Chamber:including main chamber and sub-chamber

2.Weighing system:electronic balance

3.Control system:ARM core processor and touching-LCD screen.

It can display the test data in real time, testing status or PID status, system time and testing
time.It can automatically alarm warning and print test report after finish the test.

4.Air-circulation system

5.Accessories

 Working environment

1.Environment temperature:10℃~40℃

2.Environment humidity:<85%

Technical specifications

1.Working voltage:220V50Hz40A

2.Maximum sample weight:3500g(1000g~ 1500g recommended)

3.Chamber size:350mm×440mm ×330mm

4.Maximum working temperature of chamber:550℃

5.Balance:Mettler-Toledo Balance(8100g×0.1g)

6.Test stable system:0.01%

Ignition Method Asphalt Content Tester

Ignition Method Asphalt Content Tester