Specifications
PSV-2 Skid Resistance&friction testing machinensist of spring-loaded rubber
2.high efficient ,economic cost
PSV-2 Skid Resistance&friction testing machine
This appratus consists of a spring-loaded rubber slider mounted on a pendulum arm. The arm can be adjusted vertically from a rigid support column when in operation.The base has three adjustable feet so that the swing of the pendulum during test moves through a truly circular oath while operating directly on a road surface.All bearings and working parts are enclosed where possible to protect them against wear and contamination.
| Model | PSV-2 |
| Pendulum weight | 1500g |
| Moment of pendulum's barycenter | 410mm |
| Face-on Static pressure | 22.2N(2263G) |
| Distance between edge and center of pendulum | 508mm |
| Pendulum' s sliding distance on pavement | 126mm |
| Overall dimensions | 700×360×700mm |
| Weight approx | 30Kg |


Send Inquiry to This Supplier
You May Also Like
-
TFV-1 Ten-percent Fines Aggregate Crushing Value ApparatusNegotiableMOQ: 1 Set
-
Density BasketNegotiableMOQ: 1 Set
-
ST-1 Megnesium Sulphate TesterNegotiableMOQ: 10 Sets
-
AST-1 Aggregate Soundness Tester (Stainless Steel )NegotiableMOQ: 1 Set
-
BDM-1Bulk Density Unit Weight MeasuresNegotiableMOQ: 1 Set
-
GS-1 Bar Grid SievesNegotiableMOQ: 1 Set
-
FI-1Aggragate Stainless Steel Flakiness SievesNegotiableMOQ: 1 Set
-
PSV-1Aggregate Accelerated Polishing MachineNegotiableMOQ: 1 Set
-
PSV-2 Skid Resistance & Friction TesterNegotiableMOQ: 1 Set
-
SETA-2 Double-Tube Sand Equivalent ShakerNegotiableMOQ: 1 Set








