FCA-1 Filler Compaction Apparatus
STANDARD: EN 1097-4. Also conforming to BS 812, CNR No. 23, NLT 177
1. Characteristic
Consisting of the following components:
Dropping block, 525g, comprising a hollow cylinder with a flat, closed bottom, with a inner dia. 25mm x 6.5mm inner height.
Plunger, 350g, freely sliding to the cylinder without lateral play
Solid base plate, 100mm x 150mm, 20mm thick, 2 upright pilot mounted
Overall dimensions: 100mm x 150mm x 140mm
Weight approx: 4kg
Accessories
Blow counter
Filter paper 25mm dia. Pack of 100
Vernier caliper 0-150mm x 0.01mm sens.
Our products are 100% supplied from the factory
If you are interested in our products, you can contact us directly or welcome to visit our site:
SKYPE ID: sun.nancy3



Send Inquiry to This Supplier
You May Also Like
-
HM200 Hammer Mill for LaboratoryNegotiableMOQ: 1 Set
-
HTA-S Scratch Hardness TesterNegotiableMOQ: 1 Set
-
FI-1 Flakiness SievesNegotiableMOQ: 1 Set
-
Lab Tool Mini Shovels For SaleNegotiableMOQ: 1 Set
-
RB-2 Riffle BoxesNegotiableMOQ: 1 Set
-
FI-1 Flakiness SievesNegotiableMOQ: 1 Set
-
TF-1 Freezing and Thawing Testing ChamberNegotiableMOQ: 1 Set
-
SAA-1 Sand Absorption ApparatusNegotiableMOQ: 10 Sets
-
PSV-2 Skid Resistance&friction Testing MachineNegotiableMOQ: 1 Set
-
HM200 Hammer Mill for LabotoryNegotiableMOQ: 1 Set






