Standard Testing Sieves
ASTM E-11
1. Characteristics
a. Test sieves (wire mesh sieves, testing equipment, testing machine)
b. Sieves are used to do sample selection and classification for soil, aggregates and stones.
We can supply two kinds of standard test sieves as following:
BS & ISO Standard Sieves
a. Woven Wire Mesh Sieves are manufactured from stainless steel mesh and supplied with full-depth frames.
2. Specifications
Frame diameters are avaliable as Φ200mm and Φ300mm.
Aperture sizes are as per 38μm, 45μm, 53μm, 63μm, 75μm, 80μm, 90μm, 100μm, 106μm, 125μm, 150μm, 160μm, 180μm, 200μm, 212μm, 250μm, 300μm, 315μm, 355μm, 400μm, 425μm, 500μm, 600μm, 630μm, 710μm, 800μm, 850μm, 1.00mm, 1.18mm, 1.25mm, 1.40mm, 1.60mm, 1.70mm, 2.00mm, 2.36mm, 2.50mm, 2.80mm, 3.35mm, 4.00mm, 4.75mm
b. Perforated Plate Sieves (Square Hole) are manufactured from tinned steel plate and supplied with full-depth frames.
Specifications:
Frame diameters are avaliable as Φ200mm and Φ300mm.
Aperture sizes are as per 4.00mm, 4.75mm, 5.00mm, 5.60mm, 6.30mm, 6.70mm, 7.10mm, 8.00mm, 9.50mm, 10.0mm, 11.2mm, 12.5mm, 13.2mm, 14.0mm, 16.0mm, 19.0mm, 20.0mm, 25.0mm, 28.0mm, 31.5mm, 37.5mm, 40.0mm, 45.0mm, 50.0mm, 63.0mm, 75.0mm
Lidlid and receiver diameter: Φ200mm and Φ300mm
Send Inquiry to This Supplier
You May Also Like
-
CM4-150 Cement Mortar MouldNegotiableMOQ: 200 Sets
-
CM4-150 Cube Moulds Concrete Test Cube Mould Concrete 150mm Cube Mould Stamped Concrete MouldingsNegotiableMOQ: 200 Sets
-
LR Load Ring/mechanical DynamometerNegotiableMOQ: 5 Sets
-
Cutting Collar/cutting Ring/soil Cutting CollarNegotiableMOQ: 1 Set
-
Cutting Collar/cutting Ring/soil Cutting Collar/CutterNegotiableMOQ: 1 Set
-
Proving RingNegotiableMOQ: 5 Sets
-
MM-P Plastic Mortar Mould / Joint Plastic MouldNegotiableMOQ: 200 Sets
-
CM4-150 Cube Moulds Concrete Test Cube Mould Concrete 150mm Cube MouldNegotiableMOQ: 200 Sets
-
LR Load Ring Ring IndicatorNegotiableMOQ: 5 Sets
-
Proving Ring (Load Ring)NegotiableMOQ: 5 Sets



