UniqueFire cree t6 lampes pour bicyclettes

Specifications

1.Cree XM-L T6 LED cold white light
2.700-1200 lumens
3.Aluminum alloy casing
4.Waterproof and anti-skid function
5.3 modes

 

  Description     

 

 UniqueFire 1200 Lumens 7 Watt Orange Peel Skin 3 Mode LED Hunting Head Lights (4*18650 battery)

 

1.  General household use: Shining light on hard to reach places when working on machinery, such as a car; Outdoor activities. (for climbing, camping, seeking survival, walking, diving, fishing as well as hunting, etc.)

  

2.  Made up of aluminum alloy material, the casing of the flashlight is very firm and durable. After anodize oxidizing, it avoids sleeking and rubbing to make it more comfortable in your hand.

3.  Under 100% charge situation, 4 pieces 18650 li-ion rechargeable battery pack, it can last for 3-40 hours continuously. The LED usable lifespan is 50,000hours, so you do not need to worry about changing light bulbs.

4.  Real Keystroke type switch.

 

5.  With the O-ring seal water-proof design, it deals with a nasty wild environment easily.

6.  With a hanging string  at the end of the flashlight, it is very easy for you to take along.

 

7.  Products, work stress, unique design, the rear opening, the effective conductivity to prevent the negative phenomena falling.

 

Feature                                                             

 

 

Brand:	UniqueFire
Model:	UF-HD001
LED Emitter Type:	Cree XM-L T6
Luminous Flux:	700-1200 Lumen
Lamp Life:	50,000 Hours
Power Source:	4 x 18650 battery pack
Modes:	1(Hi)/3 (High>Low>Strobe)/5(Hi>Mid>Low>Strobe>SOS)
Input Voltage:	8.4 V
Operate temperature:	-5 ~ +50 degrees celsius
Switch:	tail cap Clicky/Clickie
Construction:	Shakeproof and waterproof
Lens:	coated glass lens
Color	light blue
Running Hour:	3-40  hours
Dimensions:	5.6cm(Length)/4.3 cm(Head)/2.3cm(Tail)
Materal of Product:	aluminum alloy

 

 

Pictures Show                                                   

 

 

 

 

 

 

 Note                                                                                        

 

  ♦Please prevent your eyes from the light, the strong light will hurt you.

  ♦Please don’t disassemble the flashlights’ head part, this may occur damage to the reflector cup and the LED

  ♦Clean the flashlight with soft fabric at once if it’s stained with sea water or corrosive liquids, and blow dry it.

  ♦If you can’t screw the flashlight smoothly, please smear some silicone grease on the screw thread.

  ♦Please take out the battery if you don’t use the flashlight, and save the battery in dry conditions