UniqueFire LED Torch Light with Durable Clip and Tail Cap Button, Made of Aluminum Alloy and CREE XML T6

Specifications

1.Cree XM-L T6 LED bulb
2.Hunting and camping
3.Aluminum alloy casing
4.Dimension:150mm*58mm*21mm
5.Waterproof and 3 Mode

 

                           Description                              

 

UniqueFire LED Torch Light with Durable Clip and Tail Cap Button, Made of Aluminum Alloy and CREE XML T6 (1*18650)

1.  General household use: Shining light on hard to reach places when working on machinery, such as a car; Outdoor activities. (for climbing, camping, seeking survival, walking, diving, fishing as well as hunting, etc.)

  

2.  Made up of aluminum alloy material, the casing of the flashlight is very firm and durable. After anodize oxidizing, it avoids sleeking and rubbing to make it more comfortable in your hand.

3.  Under 100% charge situation, 1 piece 18650 li-ion rechargeable battery can last for 2-6 hours continuously. The LED usable lifespan is 50,000hours, so you do not need to worry about changing light bulbs.

4.  Real Keystroke type switch.

 

5.  With the O-ring seal water-proof design, it deals with a nasty wild environment easily.

6.  With a hanging string  at the end of the flashlight, it is very easy for you to take along.

 

7.  Products, work stress, unique design, the rear opening, the effective conductivity to prevent the negative phenomena falling.

 

Feature                                                             

 

 

Brand:	UniqueFire
Model:	UF-V1
LED Emitter Type:	Cree XM-L T6
Luminous Flux:	540-1000 Lumen
Lamp Life:	50,000 Hours
Power Source:	1 x 18650 (Not included)
Modes:	5(Hi>Mid>Low>Strobe>SOS)
Input Voltage:	3.6-4.2 V
Operate temperature:	-5 ~ +50 degrees celsius
Switch:	tail cap Clicky/Clickie
Construction:	Shakeproof and waterproof
Lens:	coated glass lens
Color	Silver with black
Running Hour:	1-2  hours
Dimensions:	15cm(Length)/5.8cm(H)2.1cm(T)
Weight:	0.195 kg
Materal of Product:	aluminum alloy

 

 

Pictures Show                                                   

 

 Note                                                                                       

 

  ♦Please prevent your eyes from the light, the strong light will hurt you.

  ♦Please don’t disassemble the flashlights’ head part, this may occur damage to the reflector cup and the LED

  ♦Clean the flashlight with soft fabric at once if it’s stained with sea water or corrosive liquids, and blow dry it.

  ♦If you can’t screw the flashlight smoothly, please smear some silicone grease on the screw thread.

  ♦Please take out the battery if you don’t use the flashlight, and save the battery in dry conditions