Rock Crusher

Specifications

 rock crusher Jaw Crusher PE 50×750.

Operating principle:
The motor drives the belt wheel, and makes movable jaw up and down by eccentric shaft. When the movable jaw rises, the angle between the fixed jaw and movable jaw gets larger, and the materials can be crushed to reach the crushing target. When the movable jaw is down, the angle between the fixed jaw and movable jaw becomes smaller. The movable jaw plate leaves the fixed jaw plate under the function of drawbar and spring, and then the crushed materials are discharged from the lower outlet of the crushing cavity.

Specification :

1, feed size (width × length)                   150×750 mm

2, the largest feed particle size                 120 mm

3, nesting I adjusted the scope                18~48 mm

4, eccentric shaft rotational speed             320 r / min

5, production capacity                              5~16m³/ h

6, motor -                                                 Y160L4

Power                                                        15KW

Speed                                                     1460/rev / min

7, long dimension                                      1380mm

wide                                                         1658mm

high                                                           337mm