Contact Platform Support
Help CenterHDPE Textured Geomembrane
Related Products
Specifications
Premium grade linear high density polyethylene (HDPE) geomembrane liner that has a textured surface on one or two sidesTextured geomembrane is a premium grade linear high density polyethylene (HDPE) geomembrane liner that has a textured surface on one or both sides of the liner. It is a coextruded, textured liner, with the textured surface as an integral part of a three layer co-extruded geomembrane sheet. Our textured geomembrane is available with width lor can be customerized.
Tech date attached
High Density Polyethylene (HDPE) Geomembrane - TexturedProperties |
Test Method |
Test Value |
Testing Frequency (minimum) |
||||||
0.75 mm |
1.00 mm |
1.25 mm |
1.50 mm |
2.00 mm |
2.50 mm |
3.00 mm |
|||
|
Thickness mils (min. ave.) lowest individual for 8 out of 10 values lowest individual for any of the 10 values |
D 5994 |
nom.(-5%) -10% -15% |
nom.(-5%) -10% -15% |
nom.(-5%) -10% -15% |
nom.(-5%) -10% -15% |
nom.(-5%) -10% -15% |
nom.(-5%) -10% -15% |
nom.(-5%) -10% -15% |
per roll |
Asperity Height mils (min. ave.) (1) |
GM 12 |
0.25 mm |
0.25 mm |
0.25 mm |
0.25 mm |
0.25 mm |
0.25 mm |
0.25 mm |
every 2nd roll (2) |
Density (min. ave.) |
D1505 /D 792 |
0.940 g/cc |
0.940 g/cc |
0.940 g/cc |
0.940 g/cc |
0.940 g/cc |
0.940 g/cc |
0.940 g/cc |
90,000 kg |
|
Tensile Properties (min. ave.) (3) yield strength break strength yield elongation break elongation |
D 6693 Type IV |
11 kN/m 8 kN/m 12% 100% |
15 kN/m 10 kN/m 12% 100% |
18 kN/m 13 kN/m 12% 100% |
22 kN/m 16 kN/m 12% 100% |
29 kN/m 21 kN/m 12% 100% |
37 kN/m 26 kN/m 12% 100% |
44 kN/m 32 kN/m 12% 100% |
9,000 kg |
Tear Resistance (min. ave.) |
D 1004 |
93 N |
125 N |
156 N |
187 N |
249 N |
311 N |
374 N |
20,000 kg |
Puncture Resistance (min. ave.) |
D 4833 |
200N |
267 N |
333 N |
400 N |
534 N |
667 N |
800 N |
20,000 kg |
Stress Crack Resistance (4) |
D 5397 (App.) |
300 hr. |
300 hr. |
300 hr. |
300 hr. |
300 hr. |
300 hr. |
300 hr. |
per GRI GM10 |
Carbon Black Content (range) |
D 1603 (5) |
2.0-3.0 % |
2.0-3.0 % |
2.0-3.0 % |
2.0-3.0 % |
2.0-3.0 % |
2.0-3.0 % |
2.0-3.0 % |
9,000 kg |
Carbon Black Dispersion |
D 5596 |
note (6) |
note (6) |
note (6) |
note (6) |
note (6) |
note (6) |
note (6) |
20,000 kg |
Oxidative Induction Time (OIT) |
D 3895 D 5885 |
100 min. 400 min. |
100 min. 400 min. |
100 min. 400 min. |
100 min. 400 min. |
100 min. 400 min. |
100 min. 400 min. |
100 min. 400 min. |
90,000 kg |
|
Oven Aging at 85°C (7),(8) |
D 5721 D 3895 D 5885 |
55%
80% |
55%
80% |
55%
80% |
55%
80% |
55%
80% |
55%
80% |
55%
80% |
per each formulation |
UV Resistance (9) |
GM11 D 3895 D 5885 |
N.R. (10) 50% |
N.R. (10) 50% |
N.R. (10) 50% |
N.R. (10) 50% |
N.R. (10) 50% |
N.R. (10) 50% |
N.R. (10) 50% |
per each formulation |
Send Inquiry to This Supplier
You May Also Like
-
High Adhesive, Water-proof, Anti Corrosion, Weather-resistant Asphalt Adhesive Glue Patch Cover for ConstructionNegotiableMOQ: 100 Rolls -
1.5mm Thick UV-resistant Geomembrane High Strength Waterproof Membrane for Dam and Canal Lining BOLIUS$ 0.15 - 0.20MOQ: 10 Square Meters
-
GeomembraneNegotiableMOQ: 2700 Rolls
-
Non-curable Rubber Paint Rubber Asphalt Waterproof Coating Made in ChinaUS$ 1.5 - 6MOQ: 500 Kilograms
-
Low Cost Waterproof Material ManufactureUS$ 1,000 - 50,000MOQ: 1 Set
-
PTFE Architectural Membrane MaterialNegotiableMOQ: 1
-
Special Compound BaseUS$ 0.12 - 0.25MOQ: 7000 Square Meters
-
PolyLock/HDPE Lock/ E Lock/ HDPE E Lock/Geomembrane Attaches HDPE GeomembranesUS$ 10 - 50MOQ: 1 Piece
-
Breathable House Wrap Membrane Roofing Waterproofing MembraneUS$ 0.42 - 0.42MOQ: 5000 Square Meters
-
<MIicroVENT> Waterproof Vent MembraneUS$ 0.1 - 3MOQ: 10000 Pieces
