Contact Platform Support
Help Center
Related Products
Rosemount 3095MFP Integral Orifice Flowmeter
Specifications
3095MFP Performance Specifications
Repeatability
±0.1%
Line Sizes
• 1/2-in. (15 mm)
• 1-in. (25 mm)
• 11/2-in. (40 mm)
Output
Two-wire 4–20 mA, user-selectable for DP, AP, GP, PT, mass flow,
or totalized flow. Digital HART protocol superimposed on 4–20 mA
signal, available to any host that conforms to the HART protocol.
Performance Statement Assumptions
• Measured pipe I.D
• Electronics are trimmed for optimum flow accuracy
Sizing
Contact an Emerson Process Management sales representative
for assistance. A “Configuration Data Sheet” is required prior to
order for application verification.
3095MFP Functional Specifications
Service
• Liquid
• Gas
• Steam
Power Supply
4–20 mA option
• External power supply required. Standard transmitter
(4–20 mA) operates on 11 to 55 Vdc with no load
Process Temperature Limits
Direct Mount Transmitter
• –40 to 450 °F (–40 to 232 °C)
Remote Mount Transmitter
Transmitter Temperature Limits
Ambient
• –40 to 185 °F (–40 to 85 °C)
• With Integral Mount LCD Display: –4 to 175 °F (–20 to 80 °C)
Storage
• –50 to 230 °F (–46 to 110 °C)
• With Integral Mount LCD Display: –40 to 185 °F (–40 to 85 °C)
Maximum Working Pressure
Transmitter
• Zero to two times the absolute pressure range with a
maximum of 3626 psia (250 bar).
Flowmeter
• Pressure retention per ANSI B16.5 600 lb. or
DIN PN100
Static Pressure Limits
Operates within specification between static pressures of 0.5 psia
(0.03 bar-A) and the URL of the static pressure sensor.
System Reference Accuracy
Percentage (%) of mass flow rate(1)
(1) Without associated straight run piping, discharge coefficient
uncertainty can add up to 1.5% - 5% additional error. Consult the
factory for additional information.
(1) High temperature option code G must be selected.
TABLE 37. 1195 Pressure Limits
Line Size
Process
Connection
Maximum Working
Pressure @ 100 °F(1)(2)
(1) For pressure ratings at temperatures less than -20 °F (-29 °C)
or above 100 °F (38 °C) consult an Emerson Process
Management representative.
(2) Transmitter static pressure range may limit maximum working
pressure. Refer to Static Pressure Ranges
Send Inquiry to This Supplier
You May Also Like
-
Yokogawa Differential Pressure Transmitter EJA110E-JMS5A-912EA Has an Accuracy of 0.075%NegotiableMOQ: 1 Piece
-
Pressure Transmitter Series With ±0.25% Accuracy, 4-20mA Output, ±0.03%FS/C Temperature Drift, and 200%FS Overload for Industrial AutomationNegotiableMOQ: 1 Piece
-
Tuning Fork Level Switch With Good Performance and StabilityNegotiableMOQ: 1 Roll
-
New 2016 Low Price Pressure TransducerUS$ 18.00 - 35.00MOQ: 1 Piece
-
Moore TransmitterNegotiableMOQ: 1
-
Smart Pressure Level TransmitterNegotiableMOQ: 1 Set
-
2 Hours Replied Factory Directly Low Cost Temperature Pressure Transmitter of SUPCONUS$ 400 - 600MOQ: 1 Piece
-
Water Pressure Switch Oil PressureUS$ 36 - 39MOQ: 1 Piece
-
Yokogawa EJA Pressure Transmitter 530a Digital Pressure Transmitter Eja110a Eja Transmitter 430aNegotiableMOQ: 1 Piece
-
Yokogawa EJA510A Absolute Pressure Transmitter Spot Sales Measuring Range 0~200kPaNegotiableMOQ: 1 Piece