Security Metal Fence Factory/Barrier-grid Panle

Description:

The security metal fence is a modern welded mesh system. The panel benefits from two different edges; barbed and flush. Providing good see-through visibility this system will not only blend into its environment but is also extremely rigid with up to three horizontal profiles. 

• Barrier heights available in 1.0m, 1.2m,1.5m, 1.8m, 2.0m & 2.4m.
• Brrier panels suit post centres of 2.0m,2.5m&3.0m
• The panels are manufactured using 5.0mm thick wires.Galvanized 4.0mm and after PVC coating 5.0mm thick.
• The mesh is configured to 50mm x 200mm and is welded at every intersection.
• The system utilises our unique patented Hexaclip fixing which comprises and anti-tamper bolts.
• To achieve additional security the panel can be installed so that the barbed edge is at the top of the fence so that it acts as a deterrent to would-be climbers.
• Where safety is key, particularly on lower height systems used in a playground setting, the panel can be installed so the flush edge is at the top of the fence so there are no sharp hazards. If opting to install barb-down inverted clips need to be ordered. 

common specification:

Surface Treatment: electric galvanized/hot dipped galvanized, then PVC coating/powder painting

Panel:

Using high quality Iron Rod as raw material, the welded panel, after galvanization, Powders Primer, and Powders top coating; it can resist the corrosive and strong ultraviolet radiation.

Fastenings:

The panels and posts are jointed together with bolts or rivets, using the steel flat bar, or special steel clamps, all nuts are self-locking. This also can be designed as the special clients requests.

Common Applications:

• Schools
• Hospitals
• General Industrial
• General Commercial
• Prestige
• Utilities
• Housing

Pictures:

Contact Me: