Contact Platform Support
Help CenterGood Quality! PLA Granules for 3D Printer/Polylactic Acid Pellets/100% Biodegradable PLA Resin
Related Products
-
New Grade/off Grade Polycarbonate PC Resin/anti-UV PC Pellets/Virgin PC GranulesUS$ 700 - 2,500MOQ: 5 Tons -
NEW Polystyrene Resin PSU Pellets PSU Granules PSU Plastic Raw MaterialUS$ 1,000 - 1,000MOQ: 25 Metric Tons
-
Linear Low Density Polyethylene LLDPE LLDPE Resin LLDPE Granules Lldpe PelletsUS$ 1,000 - 1,000MOQ: 16 Metric Tons
-
Virgin Polymethyl Methacrylate PMMA Resin/ PMMA Granules/ PMMA PelletsUS$ 800 - 2,500MOQ: 5 Tons
-
Hot Products!! Cellulose Acetate Propionate/CAP Granules for Glass/CAP PowderUS$ 800 - 3,000MOQ: 1 Ton
PLA plastic raw material use for 3d Printer.3d printer PLA plastic raw material and plastic granules.
Kinds of PLA raw material in our company:
- Suitable for any application,such as injection,extrusion and so on.
- Color: natural and white, other color also avaliable
-Grade:reinforced with glass fiber/toughness/flame retardant/
UV stabilizer as required.
FEATURE
Drying In-line drying capabilities are essential to process Ingeo biopolymer 6060D, which is supplied with a moisture content of less than 0.040% (400 ppm). The recommended moisture content to prevent viscosity degradation and potential loss of properties is < 0.005% (50 ppm). Typical drying conditions are 8-12 hours at 40°C [104oF], or to a dew point of –35°C [- 30°F], with an airflow rate of greater than 0.5 cfm/lbs per hour of resin throughput. Drying at higher temperatures will cause the pellets to stick together, as they are amorphous. To prevent moisture regain, the resin should not be exposed to atmospheric conditions after drying.
Technical Data sheet of the PLA 3D850
Properties |
Unit |
Values |
Test methods |
Specific Gravity |
g/cc |
1.24 |
ASTM D792 |
MFR |
G/10min |
7-9 |
ASTM D-1238 |
Relative Viscosity |
- |
4.0 |
ASTM-D5225 |
Peak Melt Temperature |
℃ |
165-180 |
ASTM-D3418 |
Glass Transition Temperature |
℃ |
55-60 |
ASTM-D3418 |
Tensile Yield Strength |
Mpa |
65.5 |
ASTM-D882 |
Tensile Elongation |
% |
4.3 |
ASTM-D882 |
Notched Izod Impact |
J/m |
40 |
ASTM-D256 |
Flexural Strength |
Mpa |
126 |
ASTM D-790 |
Flexural Modulus |
Mpa |
4357 |
ASTM D-790 |
Heat Distortion Temperature (℃) |
0.45Mpa |
144 |
E2092 |
Send Inquiry to This Supplier
You May Also Like
-
SABIC PC Granule 945A-116 Polycarbonate Resin for Injection MoldingNegotiableMOQ: 1 Kilogram
-
Yuntianhua YUNCON M90 POM Pellets Injection & Extrusion Grade for Industrial & Electronic PartsUS$ 1 - 1.05MOQ: 1 Kilogram
-
757K ABS Zhenjiang Qimei PA-757K Injection Grade High Rigidity and High Gloss ABS Plastic Particle Raw MaterialUS$ 1.8 - 2.2MOQ: 25 Kilograms
-
PET Release Liner and Film Facestock for Self Adhesive (pressure Sensitive) Materials, and BOPP Functional Pack Films for Packaging IndustryNegotiableMOQ: 35 Rolls
-
Plastic Raw MaterialNegotiableMOQ: 2300 Bags
-
- Flexible Water/Oil Storage Bags (TPU/PVC) - Lightweight, Space-Saving & Customizable CapacityUS$ 90 - 100MOQ: 10 Combos
-
PVC Resin Factory 25kgNegotiableMOQ: 1 Metric Ton
-
Beckett Transparent Square Telescopic Plastic Packaging Tube Box With Ratchet Length Adjustment for Cutting ToolUS$ 0.13 - 0.17MOQ: 5000 Pieces
-
Best Price Manufacturer's Natural Color PVC Powder Resin Polyvinyl Chloride for Molding Power Tool Accessories and PVC PipesUS$ 1000MOQ: 1 Ton
-
Custom PVC Gutter Guard Covers Perforated Mesh Anti-RustUS$ 2.09 - 2.78MOQ: 3000 Meters
