CO2 Monitor
Specifications
F2000IAQ-CO2 monitor/controller is used to monitoring and control room CO2 level, as well as room temperature and humidity.Gas detected |
Carbon Dioxide (CO2) |
Sensing element |
Non-Dispersive Infrared Detector (NDIR) |
Temperature sensor |
NTC |
Humidity sensor |
HS series capacitive sensor |
Temperature dependence |
0.2% FS/°C |
Temperature correction |
Self compensation |
Power supply |
24VAC/VDC, or 100~240VAC, 60HZ, selectable with the order |
Consumption |
3.5 W max. ; 2.5 W avg. |
Accuracy@25°C(77°F) |
±30ppm + 3% of reading |
Stability |
<2% of FS over life of sensor (15 yr typical) |
Calibration interval |
ABC Logic Self Calibration Algorithm |
Non linearity |
<1% of FS |
Pressure dependence |
0.13% of reading per mm Hg |
Altitude calibration |
Programmable from 0-9,900m in 100m increments |
Response Time |
<2 minutes for 90% step change |
Signal update |
Every 2 seconds |
Warm up time |
2 hours (first time) 2 minutes (operation) |
CO2 measuring range |
0~2,000ppm (default) 0~20,000ppm, programmable selection 0~50,000ppm |
CO2 setting & Display resolution |
1ppm |
Temperature measuring/ setting range |
0~50°C(32~122°F)/ 5~45°C(41~113°F) |
|
|
|
|
Humidity measuring/setting range |
0~99%RH/ 5~95%RH |
Analog output |
0~10VDC linearized output or PID control output, selectable by end users |
Output resolution |
10Bit |
Relay output |
One or two dry contact outputs with programmable selection to control CO2, temperature, humidity Rated switching current: 3A(220VAC/30VDC), resistance load |
Communication interface |
RS-485, 9600/14400/19200(default)/28800 or 38400bps (programmable selection), 15KV antistatic protection, 3 independent base address, max network node 64 |
Flow rates |
Diffusion version 80 ~ 120 cc/min Flow through version 40~50cc/min |
Operation conditions |
0~50°C(32~122°F); 0~95%RH, |
Storage conditions |
10~50°C(50~122°F)/ 20~60%RH non condensing |
NDIR life |
15 years |
Weight |
360g |
Dimensions |
130mm×90mm×40mm |
Installment standard |
65mm×65mm or 2”×4”wire box |
Interface connections |
Maxi. 9 terminals |
Wiring standard |
wire section area<1.5mm2 |
Approval Standard |
CE-Approval |
Programming and selection |
Via internal jumpers and push-buttons on the panel |
1) Application in all ventilation systems, or public places
2) Wall mounting type
3) LCD display CO2 level and temperature, also humidity (optional)
4) Specially provide the altitude calibration
5) Providing strong control outputs with up to three 0~10V analog outputs and three relay dry-contact outputs
6) The analog output with two alternatives: PID control output or linearized over full range output
7) Different control mode for delays selected by users applications such as ventilation systems or greenhouses
8) Locale adjustable range of CO2: 0~2,000ppm/0~5,000ppm/20,000ppm/ 0~50,000ppm;
adjustable range of temperature: 5~45adjustable range of humidity595%RH
9) RS-485 communication interface optional, 15KV antistatic protection, independent base address setting
10) CE-Approval
Send Inquiry to This Supplier
You May Also Like
-
Endress+Hauser E+H Compact Conductivity Device Smartec CLD18-BGGENegotiableMOQ: 1 Piece
-
Universal Testing MachineNegotiableMOQ: 2500 Pieces
-
Hydraulic Plastic Flange Connections Cover Plugs SHF SeriesUS$ 0.22 - 0.28MOQ: 2500 Pieces
-
HST Spring Dyno Friction Leakage Fatigue Testing MachineUS$ 5000 - 10000MOQ: 1 Set
-
Gates 550C 550U U550 U-550 U508 U-508 Japan Unitta U-550 Belt Tension Meter New U-508 Belt Tension Meter Upgraded Version U550US$ 1 - 900MOQ: 1 Piece
-
Analytical Balanace.scale ,weichengya Laboratory SupplierUS$ 10 - 35MOQ: 10 Sets
-
Smart MD-3051 Online Density Meter With 4-20mA OutputUS$ 2,380 - 2,500MOQ: 1 Unit
-
5W-300W Sun Simulator Watt Testing 30% Off / Xenon Lamp Sun Simulator Free Sent / Sun Simulator TestingUS$ 7,500 - 10,000MOQ: 1 Set
-
New Design Measuring Meter With Best PerforanceUS$ 1,000 - 1,200MOQ: 1 Piece
-
XK-1 Rotary Switch Life TesterNegotiableMOQ: 1 Set